Advisor Professor

Shin-Hyung-Rhee1

SHIN HYUNG RHEE

Dept. of Naval Architecture and Ocean Engineering
Seoul National University
1 Gwanank-ro, Gwanak-gu, Seoul, 151-744, Korea
Phone: +82-2-880-1500               Fax: +82-2-888-9298
Email : shr@snu.ac.kr

 

 

Employment Record

Seoul National University, Seoul, Korea                                                                                                        2007 – Present

Professor, Dept. of Naval Architecture and Ocean Engineering                                                                2012 – Present

Associate Dean for Educational Affairs, College of Engineering                                                              2011 – 2013

Associate Professor, Dept. of Naval Architecture and Ocean Engineering                                               2007 – 2012

 Seoul National University Foundation, Seoul, Korea                                                                                  2015 – 2017

Executive Director, TEPS Head Office                                                                                                      2015 – 2017

University of Central Florida, Orlando, Florida, USA                                                                                20082009

Adjunct Lecturer, Dept. of Mechanical, Materials and Aerospace Engineering                                       2008 – 2009

Fluent Inc., Lebanon, New Hampshire, USA                                                                                                2001 – 2007

Lead Engineer, Space, Defense, and Marine Industry Team                                                                     2005 – 2007

 Senior Engineer, Space, Defense, and Marine Industry Team                                                                  2004 – 2005

 Senior Engineer, Aerospace Industry Team                                                                                              2004 – 2004

 CFD Engineer, Aerospace Industry Team                                                                                                 2001 – 2004

 National Maritime Research Institute, Ship Performance Division, Tokyo, Japan                                 1999 – 2001

Science and Technology Agency (STA) Fellow

University of Iowa, Iowa City, Iowa, USA                                                                                                    1992 – 1999

Postdoctoral Research Associate, Iowa Institute of Hydraulic Research                                                  1998 – 1999

Graduate Teaching Assistant, Department of Mechanical Engineering                                                    1993 – 1995

Graduate Research Assistant, Iowa Institute of Hydraulic Research                                                        1992 – 1998

Seoul National University, Seoul, Korea                                                                                                       1991 – 1992

Graduate Research Assistant, Department of Naval Architecture

 

 

Areas of Expertise

  1. Computational Fluid Dynamics
  2. Scale Model Experiment
  3. Multi-phase Flow
  4. Viscous Flow
  5. Turbulent Flow
  6. Marine Hydrodynamics

 

Education

Ph.D.   July 1998                                                          The University of Iowa, Iowa, USA                    

Major: Mechanical Engineering 

Doctoral Thesis: Unsteady RANS Method for Boundary Layer and Wake and Wave Field

Adviser: Prof. Frederick Stern

 

M.S.E.   February 1992                                         Seoul National University, Seoul, Korea

Major: Naval Architecture and Ocean Engineering

Master Thesis: Effects of Stern Form Modification on Ship Resistance

Adviser: Prof. Hyochul Kim

 

B.S.E.   February 1990                                           Seoul National University, Seoul, Korea

Major: Naval Architecture and Ocean Engineering

Adviser: Prof. Hang Soon Choi

 

B.A.   August 2017                                       Korea National Open University, Seoul, Korea

Major: Management

 

Activities/Leadership

  1. Member of the Jury Committee, Sailing Competition, 98th Korea National Sports Festival (제 98회 전국체육대회 요트경기 심판위원), Chungbuk, Korea, 2017
  2. Member of the Advisory Board for Defense Technology Protection, the Defense Acquisition Program Administration, 2017 – 2019 (방위사업청 방산기술보호자문위원, 2017 – 2019)
  3. Member of the International Scientific Committee for the 5th International Symposium on Marine Propulsors (SMP’17), Espoo, Finland, 2017
  4. Member of the Local Organizing Committee for the 24th International conference on Port and Ocean Engineering under Arctic Conditions (POAC 2017), Busan, Korea, 2017
  5. Member of the Organizing Committee, 50th Anniversary Commemorating Conference, Korea Federation of Science and Technology Societies, 2015 – 2016 (한국과학기술단체총연합회 창립 50주년 기념사업 조직위원, 2015 – 2016)
  6. Member of the Board of Directors, Korean Society for Engineering Education, 2015 – 2016 (한국공학교육학회 이사, 2015 – 2016)
  7. Member of the International Scientific Committee for the 4th International Symposium on Marine Propulsors (SMP’15), Austin, Texas, USA, 2015
  8. 바른 과학기술사회 실현을 위한 국민연합, 사무처장, 2015
  9. Secretary of the Jury Committee, Sailing Competition, 17th Asian Games, Incheon, Korea, 2014
  10. Member of the Board of Trustees, The Korean Society for Marine Environment and Energy, 2014 – 2016 (한국해양환경에너지학회 평의원, 2014 – 2016)
  11. Associate Editor for Journal of Mechanical Science and Technology, 2014 – 2017.7.31
  12. Member of the Committee for Foreign Materials Recommendation, The National Library of Korea, 2014 – 2020 (국립중앙도서관 외국자료 추천위원, 2014 –2020)
  13. Editor of International Journal of Naval Architecture and Ocean Engineering, 2014 – Present.
  14. Member of the Local Organizing Committee for the 10th Asian Computational Fluid Dynamics Conference (ACFD10), Jeju, Korea, 2014
  15. Member of the International Advisory Committee for International Symposium on Cavitation and Multiphase Flow (ISCM2014), Tsinghua University, Beijing, China, 2014
  16. Member of the Board of Trustees, The Society of Naval Architects of Korea, 2013 – 2019.9 (대한조선학회 평의원, 2013 – 2019.9)
  17. Member of the Board of Directors, Korea Sailing Federation, 2013 – 2016 (대한요트협회 이사, 2013 –2016)
  18. Organizer of the 8th International OpenFOAM Workshop, 2013
  19. Member of the OpenFOAM Workshop Committee, 2012 – 2017
  20. Member of the Organizing Committee for Meetings of the Korea Society of Computational Fluids Engineering, 2008 – 2015 (한국전산유체공학회 학술대회 조직위원, 2008 – 2015)
  21. Member of the Editorial Board of Advances in Energy Research, 2013 – Present.
  22. Member of the Board of Directors, Gyeonggi Yacht Association, 2013 – 2016 (경기도 요트협회 이사, 2013 – 2016)
  23. Member of the Editorial Board of Energy Science and Technology, 2012 – Present.
  24. Member of the Advisory Board, Korea Sailing Federation, 2012 – 2013 (대한요트협회 자문위원, 2012 – 2013)
  25. Member of the Mentoring Supporters for National Research Facilities and Equipment, National Research Facilities and Equipment Center, 2012 – 2013 (국가연구장비 멘토링 지원단, 국가연구시설장비진흥센터, 2012 – 2013)
  26. Member of the Specialist Committee of Computational Fluid Dynamics for the 27th International Towing Tank Conference, 2012 – 2014
  27. Member of the Board of Directors, The Society of Naval Architects of Korea, 2012 – 2015 (대한조선학회 이사, 2012 – 2015)
  28. Chair of the International Journal Committee, The Society of Naval Architects of Korea, 2012 – Present (대한조선학회 국제논문집위원회 위원장, 2012 – 현재)
  29. Member of the Specialist Committee for Computational Fluid Dynamics, 27th International Towing Tank Conference, 2012 – 2014
  30. Member of the Local Committee for the 1st Asian Wave and Tidal Energy Conference, Jeju, Korea, 2012
  31. Member of the Advisory Committee, Korea Shipowners’ Association, 2011 (한국선주협회 2012년 여수세계박람회 해운항만산업 전시관 기획 및 설계 자문위원, 2011).
  32. Member of the Board of Trustees, The Korea Society of Computational Fluids Engineering, 2010 – Present (한국전산유체공학회 평의원, 2010 – 현재)
  33. Member of the Board of Directors, Seoul Yacht Association, 2010 – 2012 (서울시 요트협회 이사, 2010 – 2012)
  34. Member of the Board of Directors, The Korea Society of Computational Fluids Engineering, 2009 – Present (한국전산유체공학회 이사, 2009 – 현재)
  35. Associate Editor of International Journal of Naval Architecture and Ocean Engineering, 2009 – 2013.
  36. Member of the Quality Systems Group, 26th International Towing Tank Conference, 2009 – 2011
  37. Secretary of the Editorial Committee for the English Journal, The Society of Naval Architects of Korea, 2008 – 2011 (대한조선학회 영문편집위원회 간사, 2008 – 2011)
  38. Member of the Advisory Committee for the Yacht Industry, Gyeongnam, Korea, 2008 – 2010 (경상남도 요트산업 자문위원, 2008 – 2010)
  39. Secretariat of the Local Organizing Committee for the 27th Symposium on Naval Hydrodynamics, 2008
  40. Faculty Adviser for the Seoul National University Sailing Club, 2007 – Present (서울대학교 요트부 지도교수, 2007 – 현재)
  41. Member of the Technical Review Committee for the 9th International Conference on Numerical Ship Hydrodynamics, 2006
  42. Student Mentor for Society of Naval Architects and Marine Engineers, 2006
  43. Member of American Institute of Aeronautics and Astronautics, 2003 – 2004, 2009 – 2011.
  44. Member of Society of Naval Architects and Marine Engineers, 2001 – Present
  45. Member of Japan Society of Naval Architects and Ocean Engineers, 2000 – Present
  46. Member of American Society of Mechanical Engineers, 1998 – Present
  47. Member of the Local Organizing Committee for the 25th American Towing Tank Conference, Iowa City, Iowa, 1998
  48. Member of Korean-American Scientists and Engineers Association, 1993 – 1997
  49. Member of the Organizing Committee and President of Seoul National University Sailing Club, 1987 – 1988

 

 

Awards

  1. 대한기계학회 영문논문집 부편집인 근속 공로상 (Outstanding Service Award, Journal of Mechanical Science and Technology, The Korean Society of Mechanical Engineers), July 2017.
  2. 제10회 조선해양의 날 산업통상자원부장관 표창 (Minister Award, Ministry of Trade, Industry and Energy), September 2013.
  3. 한국풍력에너지학회 2013년 춘계학술대회 우수논문상 (Excellent Paper Award, Spring Meeting 2013, Korea Wind Energy Association), June 2013.
  4. 제 8회 서울대학교 공과대학 신양공학학술상 (Sinyang Engineering Faculty Award, College of Engineering, Seoul National University), December 2012.
  5. 과학기술단체 총연합회 제22회 과학기술 우수논문상 (Excellent Paper Award, The Korean Federation of Science and Technology Societies), July 2012.
  6. 제26회 서울특별시장배 요트경기대회 국제 호비16급 일반부 3위 (3rd place, 26th Seoul Mayor’s Cup Yacht Race, International Hobie 16 class), May 2011.
  7. 한국해양환경공학회 우수논문상 (Excellent Paper Award, Korea Society of Marine Environmental Engineering), November 2009.
  8. 서울대학교 공과대학 우수연구교수상 (Excellent Research Professor Award, College of Engineering, Seoul National University), March 2008.

 

 

International Peer-Reviewed Journals Served as Technical Reviewer

  1. Journal of Zhejiang University – Science A, 2016
  2. Advances in Tribology, 2016
  3. Science China Technological Sciences, 2015
  4. Experimental Thermal and Fluid Science, 2015
  5. Energies, 2015
  6. International Journal of Technology, 2015
  7. Advances in Mechanical Engineering, 2014 – 2017
  8. Computers and Fluids, 2013 – 2015
  9. Engineering Applications of Computational Fluid Mechanics, 2012 – 2017
  10. Ships and Offshore Structures, 2010 – 2015
  11. Ocean Engineering, 2009 – 2017
  12. Journal of Mechanical Science and Technology, 2009 – 2015
  13. Applied Ocean Research, 2008 – 2015
  14. International Journal of Heat and Mass Transfer, 2014
  15. Advanced Shipping and Ocean Engineering, 2014
  16. International Journal of Engineering and Technology Innovation, 2014
  17. Journal of Marine Science and Application, 2014
  18. Mathematical Problems in Engineering, 2013 – 2014
  19. Energy Conversion and Management, 2012 – 2014
  20. ASME Journal of Fluids Engineering, 2005 – 2014
  21. Journal of Ocean University of China, 2013
  22. Journal of Fluids, 2013
  23. International Journal of Rotating Machinery, 2012
  24. Journal of Ship Research, 2009 – 2012
  25. Journal of Marine Science and Technology, 2003 – 2012
  26. AIAA Journal, 2011
  27. Journal of Ocean Technology, 2009

 

 

Special Training/Certificates

  1. TEPS (Test of English Proficiency developed by SNU), Level 1, 2015
  2. 요트경기 국가심판 자격증, 대한요트협회 (National Judge License – Sailing, Korea Sailing Federation), 2013
  3. 세일링 지도자 3급 자격증 – 딩기 & 킬보트, 국민생활체육전국요트연합회 (Sailing Instructor License – 3rd Level, Korea Yacht Association of Sport for All), 2013
  4. Sandler’s Professional Advantage, Sandler Sales Institute, 2005
  5. Avoiding Grammatical Errors in Business Writing, SmartForce, SkillSoft, 2003
  6. Managing Time, SmartForce, SkillSoft, 2003
  7. Delegation Basics, SmartForce, SkillSoft, 2003
  8. AIAA Professional Development Short Course: Stability and Transition: Theory, Modeling, and Application, June 2003
  9. Project Management: Fundamentals, SmartForce, SkillSoft, 2003
  10. ANSI C Programming: Introducing C, SmartForce, SkillSoft, 2002
  11. Cardiopulmonary Resuscitation (CPR) Training for Family and Friends, American Heart Association, June 2002
  12. Cornell Theory Center Virtual Workshop: Introduction to Parallel Computing and Programming Languages, January – February 1999
  13. Cornell Theory Center Virtual Workshop: Serial and Parallel Performance Issues, May – June 1998

 

 

Languages

Proficient in speaking and writing in English, Japanese, and Korean

 

 

Sponsored Research

  1. Study of Damaged Ship Maneuverability Based on Towing Tank Tests and Mathematical Maneuvering Models (수학적 모델과 예인수조 시험에 근거한 손상 선박의 조종성능 연구), Naval International Cooperative Opportunities in Science and Technology (NICOP) funded by the Office of Naval Research, US Navy, 2016 – 2019, as Principal Investigator
  2. CFD Analysis for Exploratory Development of KSS-III Batch-II (장보고 – III Batch – II 탐색개발 CFD 해석), funded by Daewoo Shipbuilding and Marine Engineering Co., Ltd., 2016 – 2017, as Principal Investigator
  3. Development of Numerical Simulator for Environmental Load on Ship and Offshore in Polar Region (극지환경 선박 및 해양플랜트용 환경하중해석 시뮬레이터 개발), funded by the Ministry of Trade, Industry and Energy, 2015 – 2018, as Principal Investigator
  4. Hydrodynamic Forces and Cavity Characteristics of a Supercavitating Underwater Vehicle with Control Plane (초공동 상태의 운동체/제어판 작용 유체력 및 공동 특성 연구), funded by the Agency for Defense Development, 2014 – 2017, as Principal Investigator
  5. Analysis Methodology for Free Running of Damage Ship Stability Using Computational Fluid Dynamics (전산유체역학을 이용한 자유항주 중인 손상상태 선박의 안정성 해석), funded by the Ministry of Science, ICT, and Future Planning, 2013 – 2016, as Principal Investigator
  6. Experimental study on Safe-Return-To-Port of a Damaged Ship for CFD validation (CFD 검증을 위한 손상상태 선박의 안전귀항에 관한 실험적 연구), Naval International Cooperative Opportunities in Science and Technology (NICOP) funded by the Office of Naval Research, US Navy, 2013 – 2016, as Principal Investigator
  7. EEDI Verification Through Model Test Procedures and CFD Simulations, funded by American Bureau of Shipping, 2013, as Principal Investigator
  8. Advanced Naval Vessels Research Laboratory (차세대 함정 첨단함형 특화연구실), funded by the Ministry of Defense, 2012 – 2017
  9. Performance Test of Unmanned High Speed Vehicle (무인선 고속유체 성능시험), funded by the Ministry of Land, Transport, and Maritime Affairs, 2012 – 2013, as Principal Investigator
  10. Development 50-kt class high-speed craft hull form and powering estimation formula through towing tank experiments (50노트급 고속정 선형 개발 및 모형 시험을 통한 마력 계산방법 연구), funded by the Ministry of Defense, 2012, as Principal Investigator
  11. Development and utilization of fluid dynamic simulation software for naval architecture and ocean engineering education and research (조선해양 교육 및 연구를 위한 시뮬레이션 소프트웨어 개발 및 활용 연구), funded by the Ministry of Education, Science, and Technology, 2011 – 2015, as Principal Investigator
  12. Development of multi-phase flow simulation program for the design of high value-added ships (고부가가치 선박 설계를 위한 다상유동 시뮬레이션 프로그램 개발), funded by Small and Medium Business Administration, 2011 – 2012, as Principal Investigator
  13. Development and application of a flow analysis program based on the open source CFD code, OpenFOAM (소스 공개 CFD 코드 OpenFOAM을 기반으로 한 선체 및 프로펠러 주위 유동해석 프로그램 개발 및 적용), funded by Hyundai Heavy Industries, 2011 – 2012, as Principal Investigator
  14. Measurement of the local flow around the propeller and rudder using towed two-dimensional particle image velocimetry (예인수조용 2차원 입자영상유속계를 이용한 프로펠러 및 타 주위 국부유동 계측), funded by Samsung Heavy Industries, 2011, as Principal Investigator
  15. Research and development for simulation platform for applications of new FRP manufacturing techniques including infusion and RTM (인퓨전, RTM 등 FRP 신공법 적용을 위한 시뮬레이션 기반구축에 관한 연구개발), funded by the Ministry of Knowledge Economy, 2010 – 2011
  16. Study of Damaged Ship Stability – 6DOF FSI Experimental Database (선박의 손상상태 안정성 연구 – 6자유도 FSI 실험 데이터베이스 구축), funded by the Ministry of Education, Science, and Technology, 2010 – 2012, as Principal Investigator
  17. Floating Oscillating Type Wave Energy Power Generation Technology Development and Verification (부유식 진자형 파력발전 기술개발 및 실증), funded by the Ministry of Land, Transport and Maritime Affairs, 2010 – 2013
  18. Development of multi-functional 5-axis milling station for production of the full-scale leisure boat (레저 선박 제작용 초대형 다기능 5축 삭성기 개발), funded by the Ministry of Knowledge Economy, 2009 – 2012
  19. Development of a performance analysis method for the yacht sail system using fluid-structure interaction technology (유체-구조 연성해석에 의한 복합형 요트 세일의 성능해석법 개발), funded by the Ministry of Education, Science, and Technology, 2009 – 2012
  20. Study of analysis technique for 6DOF motion (6DOF 해석 기술), M3CFD Research Center funded by the Ministry of Education, Science, and Technology, 2009 – 2016
  21. Study on the cavitator design and analysis of super-cavitating underwater vehicle (초공동 발생 캐비테이터 설계/해석에 관한 연구), Super-Cavitating Underwater Vehicle Research Center funded by the Agency of Defense Development, 2009 – 2014
  22. Experimental study of damaged ship stability for CFD validation (CFD 검증을 위한 손상상태 안정성에 관한 실험적 연구), Naval International Cooperative Opportunities in Science and Technology (NICOP) funded by the Office of Naval Research, US Navy, 2009 – 2012, as Principal Investigator
  23. Technology development of propeller and rudder for a ship with low vibration and high efficiency (저진동-고효율 추진기 및 방향타 개발 기술), funded by the Ministry of Knowledge Economy, 2009 – 2011
  24. Development of standardized S/W system for the integrated design of tidal current turbines (조류발전용 터빈 통합설계용 표준화 S/W 시스템 개발), funded by the Ministry of Knowledge Economy, 2009 – 2012
  25. Tidal stream energy conversion turbine performance analysis (조류발전 터빈 성능해석), Tidal Stream Energy Research Center funded by the Ministry of Knowledge Economy, 2009 – 2012
  26. Development of the model-scale effective wake prediction and its extension to full-scale (모형선 스케일에서의 유효반류분포 예측방법 개발 및 실선 스케일로의 확장방법 연구), funded by Hyundai Heavy Industries, 2009 – 2011, as Principal Investigator
  27. Robust design of multi-physics problems in marine engineering (조선해양공학에서 다중물리문제의 강건설계), World Class University project funded by the Ministry of Education, Science, and Technology, 2008 – 2013, as Principal Investigator
  28. Study on the design technology of hydro-elastic propulsors made of composite materials (탄성변형을 고려한 복합재 추진기 설계기법 연구), funded by Defense Acquisition Program Administration, 2008 – 2012
  29. Experimental study on the resistance performance enhancement through anti-sinkage appendages (선체부가물을 이용한 연료 저감장치 연구), funded by STX Shipbuilding, 2008 – 2009, as Principal Investigator
  30. 차기 군수지원함사업 개념 설계 기술지원 용역, funded by Defense Acquisition Program Administration, 2008, as Principal Investigator
  31. 함정 기본설계 업체선정 평가기준 연구용역, funded by Defense Acquisition Program Administration, 2008, as Principal Investigator
  32. Development and validation of ship self-propulsion simulator (선박의 자항성능 추정을 위한 시뮬레이터의 개발 및 검증), funded by Korea Science and Engineering Foundation, 2008 – 2010, as Principal Investigator
  33. Leak simulation in the LNG carrier cargo containment system using CFD (CFD를 이용한 LNG선 화물창의 방벽 내 Leak Simulation), funded by Samsung Heavy Industries, 2008, as Principal Investigator
  34. Hull form development and performance evaluation of cruise ships with podded propulsors (POD 추진기 장착 크루즈선의 선형개발 및 성능평가 기술개발), funded by Daewoo Shipbuilding and Marine Engineering, 2008 – 2010, as Principal Investigator
  35. Local sloshing impact analysis for LNG tank walls using CFD-FEA coupled tools (CFD-FEA 연계 툴을 이용한 LNG 탱크 슬로싱 국소 충격력 해석), funded by Lloyd’s Register Educational Trust (LRET) through LRET Research Center at Seoul National University, 2008 – 2010, as Principal Investigator
  36. Study of Fundamental Aspects of Damaged Stability of Ships – Understanding of Water-on-Deck Events (선박의 손상상태 안전성 향상을 위한 기초연구 – 갑판침수현상의 이해), funded by Korea Research Foundation, 2007 – 2008, as Principal Investigator
  37. Development of high-lift control devices for ships (선박용 고양력 날개장치의 성능검증 및 최적향상 도출), funded by Korea Science & Engineering Foundation through Ship Flow Control Lab at Inha University, 2007 – 2012
  38. Hydrodynamic analysis tool development for under-water vehicles (수중함의조종성능해석), funded by Daewoo Shipbuilding & Marine Engineering Co., Ltd., 2006 – 2008
  39. Architectural Concepts & Hydrodynamics Technologies for High Speed Sealift to Austere Port, Subtask B: Computational Approach and Hydrodynamics Tools, funded by the Office of Naval Research, 2005 – 2007
  40. Computational hydrodynamics CFD code development for surface ship boundary layer, wake, and wave field, funded by the Office of Naval Research, 1992 – 1999

 

Patents Registered

  1. 부유쓰레기 처리시스템 및 이를 활용한 쓰레기처리 방법 (Drone Type Device System and Method for Cleaning Floating Pollutant), 발명자: 이신형, 유성근, 권귀감, 임유진, 최우영, 최재혁 (S.H. Rhee, S.G. Yoo, G.G. Kwon, Y.J. Im, W.Y. Choi, J.H. Choi), 출원번호 10-2015-0040001, 등록번호 10-2016-0113823, Registered Korea patent (10-0113823), October 4, 2016.
  2. 레이저를 이용한 예인수조 레일용 계측장치 및 이에 의한 계측방법 (Measuring Apparatus for Rail of Towing Tank using Laser and Measuring Method Thereof), 발명자: 이신형, 서정화, 유극상 (S.H. Rhee, J.H. Seo, G.S. Yoo), 출원번호 10-2014-0064510, 등록번호 10-1652365, Registered Korea patent (10-1652365), August 24, 2016.
  3. 조류발전용 요제어 시험장치 (Test Apparatus for Yaw Controlling of a Tidal Stream Power Generation), 발명자: 고진환, 이광수, 김지훈, 이신형, 서정화, 이용국, 최두환 (J.H. Ko, K.S. Lee, J.H. Kim, S.H. Rhee, J.H. Seo, Y.K. Lee, D.H. Choi), 출원번호 10-2013-0137941, 등록번호 10-1493258, Registered Korea patent (10-1493258), February 9, 2015.
  4. 플랩타입의 조류발전장치 및 그 운용방법 (Generating Apparatus for Flap Type Current Turbine and Operation Method of Same), 발명자: 이신형, 서정화, 임태구, 유극상, 김창희, 이희범, 박미연 (S.H. Rhee, J.H. Seo, T.G. Lim, G.S. Yoo, C.H. Kim, H.B. Lee, M.Y. Park), 출원번호 10-2013-0167591, 등록번호 10-1489177, Registered Korea patent (10-1489177), January 28, 2015.
  5. 수평축 조류 발전 터빈, 이의 제조 방법 및 이를 이용한 조류 발전 방법 (Horizontal Axis Tidal Current Power Turbine, Manufacturing Method and Power Generation Method), 발명자: 박성우, 박세완, 서정화, 설동명, 유극상, 유동현, 이신형, 임진호, 정태종, 차상현 (S.W. Park, S.W. Park, J.H. Seo, D.M. Seol, G.S. Yoo, D.H. You, S.H. Rhee, J.H. Lim, T.J. Jung, S.H. Cha), 출원번호 10-2012-0055952, 등록번호 10-1335336, Registered Korea patent (10-1335337), November 26, 2013.
  6. 가변면적 조류 발전 터빈, 이의 제조 방법 및 이를 이용한 조류 발전 방법 (Controllable Projected Area Tidal Current Power Turbine, Manufacturing Method and Power Generation Method), 발명자: 미르, 박세완, 백강민, 서정화, 설동명, 유극상, 이신형, 정동욱, 정태종, 최재복 (Mir, S.W. Park, G.M. Baek, J.H. Seo, D.M. Seol, G.S. Yoo, S.H. Rhee, D.W. Jung, T.J. Jung, J.B. Choi), 출원번호 10-2012-0055940, 등록번호 10-1335337, Registered Korea patent (10-1335337), November 26, 2013.
  7. 예인전차용 레일 교정 장치 및 방법 (Rail Correction Apparatus and Method for Towing Tank), 발명자: 이신형, 유극상, 정태종, 설동명, 서정화 (S.H. Rhee, G.S. Yoo, T.J. Jeong, D.M. Seol, J.H. Seo), 출원번호 10-2012-055986, 등록번호 10-1326499, Registered Korea patent (10-1326499), November 1, 2013.
  8. 조류발전 터빈의 모형실험 시스템 (Model Test System for Tidal Stream Turbine), 발명자: 이신형, 유극상, 정태종, 설동명, 서정화, 유지명 (S.H. Rhee, G.S. Yoo, T.J. Jeong, D.M. Seol, J.H. Seo, J.M. Yoo), 출원번호 10-2011-0023332, 등록번호 10-1301241, Registered Korea patent (10-1301241), August 22, 2013.
  9. 예인수조용 쇄파 장치 및 방법 (Wave Absorbing Apparatus and Method for Towing Tank), 발명자: 이신형, 유극상, 정태종, 설동명, 서정화 (S.H. Rhee, G.S. Yoo, T.J. Jeong, D.M. Seol, J.H. Seo), 출원번호 10-2012-0056405, 등록번호 10-1280861, Registered Korea patent (10-1280861), June 26, 2013.
  10. 손상선박의 안정성 해석을 위한 모형선 시스템 및 그 모형선의 거동 관찰방법 (A Model Ship System for Safety Analysis of Damaged Ship and the Method for Motion Probing the Damaged Model Ship), 발명자: 이신형, 이성균, 유지명, 이기표, 이현호, 유극상, 정태종, 설동명, 서정화 (S.H. Rhee, S.K. Lee, J.M. Yoo, K.P. Rhee, H.H. Lee, G.S. Yoo, T.J. Jeong, D.M. Seol, J.H. Seo), 출원번호 10-2011-0084949, 등록번호 10-1261264, Registered Korea patent (10-1261264), Apr. 30, 2013.
  11. 고효율 저소음 조류발전용 터빈 블레이드 (High Efficiency and Low Noise Tidal Blade of Turbine for Tidal Stream Power), 발명자: 김문찬, 이신형, 현범수, 남종호, 신병철, 이주현, 도인록 (M.C. Kim, S.H. Rhee, B.S. Hyun, J.H. Nam, B.C. Shin, J.H. Lee and I.R. Do), 출원번호 10-2010-0052124, 등록번호 10-1213781, Registered Korea patent (10-1213781), December 12, 2012.
  12. 예인수조용 입자영상유속계 시스템 (Towed Particle Image Velocimetry System), 발명자: 이신형, 유극상, 설동명, 서정화, H. Rhee, G.S. Yoo, D.M. Seol, J.H. Seo), 출원번호 10-2010-0084879, 등록번호 10-1216706 Registered Korea patent (10-1216706), December 21, 2012.
  13. 예인수조용 입자영상유속계의 추적입자 살포장치 (Tracer Particle Spraying Apparatus for Particle Image Velocimetry in Towing Tank), 발명자: 이신형, 유극상, 설동명, 서정화 (S.H. Rhee, G.S.Yoo, D.M.Seol, J.H. Seo), 출원번호 2011-0013384, 등록번호 10-1205172 Registered Korea patent (10-1205172), November 20, 2012.
  14. 컴퓨터를 이용한 선박설계 방법 (Computational Method for Ship Hull Design), 발명자: 이신형, 서정화, 최정은 (S.H. Rhee, J.H. Seo, J.E. Choi), 출원번호 10-2010-0053287, 등록번호 10-1165018 Registered Korea patent (10-1165018), July 25, 2012.
  15. 이중차단 틈새 유동차단기가 고정부와 가동부 사이에 설치된 선박용 타 장치 장치 (Ships Rudder with Double Acting Gap Flow Stopper between Fixed and Movable Part), 발명자: 김효철, 유재문, 오정근, 이신형, 서정천 (H. Kim, J.M. Lew, J.K. Oh, S.H. Rhee, and J.C. Suh), 출원번호 10-2006-0054006, 등록번호 10-0735724, Registered Korea patent (10-0735724), June 28, 2007.
  16. 혼과 타판 사이에 틈새 유동차단장치가 설치된 타 장치 (Rudder of a Ship with Gap Flow Stopper between Horn and Rudder), 발명자: 김효철, 서정천, 이신형, 양지만 (H. Kim, J.C. Suh, S.H. Rhee, and J.M. Yang), 출원번호 10-2005-0040256, 등록번호 10-605125, Registered Korea patent (10-605125), July 19, 2006.

 

 

Patents Applied

  1. 콘크리트 구조물의 해상 운송을 위한 예인 저항 저감 장치 (Towing Resistance Reduction Device for Concrete Structure Shipping), 발명자: 박창욱, 박현일, 정병진, 박종천, 이신형 (C.W. Park, H.I. Park, B.J. Jung, J.C. Park, S.H. Rhee), 출원 번호 10-2014-0188232, Applied for Korea patent (10-2014-0188232), Dec. 24, 2014.
  2. 레이저를 이용한 예인수조 레일용 계측장치 및 이에 의한 계측방법 (Measuring Apparatus for Rail of Towing Tank using Laser and Measuring Method Thereof), 발명자: 이신형, 서정화, 유극상 (S.H. Rhee, J.H. Seo, G.S. Yoo), 출원번호 10-2014-0064510, Applied for Korea patent (10-2014-0064510), May 28, 2014.
  3. 조류발전장치 (Tidal Stream Power Generation Device), 발명자: 이신형, 설동명, 정태종, 서정화, 박선호, 유지명, 김준영, 김현욱, 박오현 (S.H. Rhee, D.M. Seol, T.J. Jeong, J.H. Seo, S.H. Park, J.M. Yoo, J.Y. Kim, H.W. Kim, O.H. Park), 출원번호 10-2011-0078896, Applied for Korea patent (10-2011-0078896), Aug. 09, 2011.
  4. 윙렛이 설치된 조류 발전용 수직형 터빈 (Vertical Axis Turbine with Winglet for Tidal Stream Power Generation), 발명자: 현범수, 이신형, 김문찬, 이정기, 최다혜 (B.S. Hyun, S.H. Rhee, M.C. Kim, J.G. Lee, D.H. Choi), 출원번호 10-2011-0029778, Applied for Korea patent (10-2011-0029778), March 31, 2011.

 

Software Programs

  1. SNUFOAM-EDISON-Ship Mesh Advanced-3D, 저작자: 서울대학교 산학협력단 (SNU R&DB Foundation), 참여자: 최학규, 이신형 (K. Choi and S.H. Rhee), 등록번호 C-2016-012119, Software registered with Korea Copyright Commission (C-2016-012119), May 2016.
  2. SNUFOAM-EDISON-EDISON-Ship Resistance with free-surface, 저작자: 서울대학교 산학협력단 (SNU R&DB Foundation), 참여자: 최학규, 이신형 (K. Choi and S.H. Rhee), 등록번호 C-2016-012118, Software registered with Korea Copyright Commission (C-2016-012118), May 2016.
  3. SNUFOAM-EDISON-EDISON-POW Advanced-3D, 저작자: 서울대학교 산학협력단 (SNU R&DB Foundation), 참여자: 최학규, 이신형 (K. Choi and S.H. Rhee), 등록번호 C-2016-012117, Software registered with Korea Copyright Commission (C-2016-012117), May 2016.
  4. SNUFOAM-EDISON-dynamicMesh for underwater vehicle, 저작자: 서울대학교 산학협력단 (SNU R&DB Foundation), 참여자: 이희범, 이신형 (H.B. Lee and S.H. Rhee), 등록번호 C-2015-024811, Software registered with Korea Copyright Commission (C-2015-024811), October 2015.
  5. SNUFOAM-EDISON-Container Ship Resistance Package, 저작자: 서울대학교 산학협력단 (SNU R&DB Foundation), 참여자: 이희범, 이신형 (H.B. Lee and S.H. Rhee), 등록번호 C-2015-016734, Software registered with Korea Copyright Commission (C-2015-016734), July 2015.
  6. SNUFOAM-EDISON-POW, 저작자: 서울대학교 산학협력단 (SNU R&DB Foundation), 참여자: 이희범, 이신형 (H.B. Lee and S.H. Rhee), 등록번호 C-2015-015788, Software registered with Korea Copyright Commission (C-2015-015788), July 2015.
  7. SNUFOAM-EDISON-Cavitation-2D, 저작자: 서울대학교 산학협력단 (SNU R&DB Foundation), 참여자: 이희범, 이신형 (H.B. Lee and S.H. Rhee), 등록번호 C-2014-013968, Software registered with Korea Copyright Commission (C-2014-013968), June 2014.
  8. SNUFOAM-EDISON-Cavitation-3D, 저작자: 서울대학교 산학협력단 (SNU R&DB Foundation), 참여자: 이희범, 이신형 (H.B. Lee and S.H. Rhee), 등록번호 C-2014-013959, Software registered with Korea Copyright Commission (C-2014-013959), June 2014.
  9. SNUFOAM-EDISON-VOF-2D, 저작자: 서울대학교 산학협력단 (SNU R&DB Foundation), 참여자: 이희범, 이신형 (H.B.Lee and S.H. Rhee), 등록번호 C-2013-012059, Software registered with Korea Copyright Commission (C-2013-012059), June 2013.
  10. SNUFOAM-EDISON-WAVE-2D, 저작자: 서울대학교 산학협력단 (SNU R&DB Foundation), 참여자: 이희범, 이신형 (H.B.Lee and S.H. Rhee), 등록번호 C-2013-012060, Software registered with Korea Copyright Commission (C-2013-012060), June 2013.
  11. SNUFOAM-EDISON-Laminar-2D, 저작자: 서울대학교 산학협력단 (SNU R&DB Foundation), 참여자: 이희범, 이신형 (H.B.Lee and S.H. Rhee), 등록번호 C-2012-015409, Software registered with Korea Copyright Commission (C-2012-015409), August 2012.
  12. SNUFOAM-EDISON-Laminar-Axis, 저작자: 서울대학교 산학협력단 (SNU R&DB Foundation), 참여자: 이희범, 이신형 (H.B.Lee and S.H. Rhee), 등록번호 C-2012-015410, Software registered with Korea Copyright Commission (C-2012-015410), August 2012.
  13. SNUFOAM-EDISON-Turbulent-2D, 저작자: 서울대학교 산학협력단 (SNU R&DB Foundation), 참여자: 이희범, 이신형 (H.B.Lee and S.H. Rhee), 등록번호 C-2012-015411, Software registered with Korea Copyright Commission (C-2012-015411), August 2012.
  14. SNUFOAM-EDISON-Turbulent-Axis, 저작자: 서울대학교 산학협력단 (SNU R&DB Foundation), 참여자: 이희범, 이신형 (H.B.Lee and S.H. Rhee), 등록번호 C-2012-015412, Software registered with Korea Copyright Commission (C-2012-015412), August 2012.
  15. SNUFOAM-CompressibleFlow, 저작자: 박선호, 이신형 (S. Park and S.H. Rhee), 등록번호 2011-01-179-002913, Software registered with Korea Copyright Commission (2011-01-179-002913), May 2011.
  16. BEMT(Blade Element Momentum Theory)를 이용한 수평축 조류발전 터빈 성능해석 프로그램 (Performance Analysis Program for Horizontal Axis Tidal Stream Turbines using BEMT), 저작자: 이신형, 이주현, 김동환 (S.H. Rhee, J.H.Lee, and D.H.Kim), 등록번호 2010-01-181-007940, Software registered with Korea Copyright Commission (2010-01-181-007940), December 2010.
  17. SNUFOAM-6DOF, 저작자: 박선호, 이신형 (S. Park and S.H. Rhee), 등록번호 2010-01-179-005890, Software registered with Korea Copyright Commission (2010-01-179-005890), October 2010.
  18. SNUFOAM-MeshMotion, 저작자: 박선호, 이신형 (S. Park and S.H. Rhee), 등록번호 2010-01-179-005889, Software registered with Korea Copyright Commission (2010-01-179-005889), October 2010.
  19. SNUFOAM-SRF, 저작자: 박선호, 이신형 (S. Park and S.H. Rhee), 등록번호 2010-01-179-005888, Software registered with Korea Copyright Commission (2010-01-179-005888), October 2010.
  20. SNUFOAM-Cavitation, 저작자: 박선호, 이신형 (S. Park and S.H. Rhee), 등록번호 2010-01-179-005887, Software registered with Korea Copyright Commission (2010-01-179-005887), October 2010.
  21. 초기 선형 설계를 위한 자동화 툴 (Automation tool for initial hull form design), 저작자: 이주현, 이신형 (J.H. Lee and S.H. Rhee), 등록번호 2010-01-121-004015, Software registered with Korea Copyright Commission (2010-01-121-004015), July 2010 à 등록번호 S-2010-004015-2, Software registered with Korea Copyright Commission (S-2010-004015-2), March 2015.

 


Graduate Students Supervised

 

Doctor of Philosophy in Engineering

 

1.        Dong Myung Seol

Thesis Title: 예인수조용 2차원 입자영상유속계를 이용한 유선형 수면관통 물체 후류의 난류유동 해석 (Turbulent flow measurements on the wake of a streamlined surface-piercing body using two-dimensional towed underwater PIV system)

Year Degree Conferred: 2013

Current Affiliation: Defense Acquisition and Procurement Agency

 

2.        Sunho Park

Thesis Title: Development of practical method for prediction of cavitation erosion with turbulent flow using computational fluid dynamics: cavitation erosion prediction

Year Degree Conferred: 2013

Current Affiliation: Korea Maritime University

 

3.        Hyun-Ho Lee

Thesis Title: 콘테이너 운반선의 선미 슬래밍 하중 추정에 대한 실험적 연구 (An experimental study on the prediction of stern slamming loads on containerships)

Year Degree Conferred: 2013

Current Affiliation: Hyundai Heavy Ind.

 

4.        Heebum Lee

Thesis Title: 파랑 중 선박의 6자유도 운동 해석을 위한 전산유체역학 기법 연구 –자유수면유동 및 부유체 운동을 중심으로- (A study of computational schemes for six degree-of-freedom motion of a ship in waves –Free-surface flow and floating body motion-)

Year Degree Conferred: 2015

Current Affiliation: Research Institute of Marine Systems Engineering, Seoul National University

 

5.        Jeonghwa Seo

Thesis Title: 자유수면이 수면관통물체 주위의 난류 경계층과 후류에 미치는 영향 (Free-Surface Effects on Turbulent Boundary Layer and Near-Wake Around a Surface-Piercing Body)

Year Degree Conferred: 2016

Current Affiliation: Post-doctoral researcher, Seoul National University

 

6.        Bumwoo Han

Thesis Title: Propeller Boss Cap Fins의 설계요목 변화에 따른 허브 보오텍스 감소효과에 대한 실험적 연구 (Experimental Study on Hub Vortex Reducing Effect of Propeller Boss Cap Fins According to Variation of Design Parameters)

Year Degree Conferred: 2017

Current Affiliation: Hyundai Heavy Industries Co., Ltd.

 

Master of Science in Engineering

 

1.        Changmin Lee

Thesis Title: 2차원 타 단면에서 일어나는 캐비테이션 특성의 실험적 연구 (Experiment Study on Cavitation Characteristics on a Two-Dimensional Rudder Section)

Year Degree Conferred: 2010

Current Affiliation: Individual Contractor to Exxon Mobil

 

2.        Ho-Jeong Lim

Thesis Title: CFD 검증을 위한FPSO 선수부 갑판 침수 실험 (Experiemental study of the FPSO bow water shipping for CFD validation)

Year Degree Conferred: 2011

Current Affiliation: Daewoo Shipbuilding and Marine Engineering

 

3.        Hee Bum Lee

Thesis Title: Fluid-structure interaction analysis of two-dimensional cross section of yacht sails

Year Degree Conferred: 2011

Current Affiliation: Seoul National University (Ph.D. course)

 

4.         Ju Hyun Lee

Thesis Title: Computational methods for open water performance prediction of tidal stream turbines

Year Degree Conferred: 2011

Current Affiliation: Samsung Heavy Ind.

 

5.         Ji Myoung You

Thesis Title: CFD 검증을 위한 손상 선박의 횡동요 감쇠 운동에 대한 실험적 연구 (Experimental study on the roll decay of a damaged ship for CFD validation)

Year Degree Conferred: 2012

Current Affiliation: Hyundai Heavy Ind.

 

6.         Se Wan Park

Thesis Title: 수평축 조류발전 터빈의 비설계 조건을 고려한 성능해석 (Performance analysis of a horizontal axis tidal stream turbine considering off-design conditions)

Year Degree Conferred: 2013

Current Affiliation: Maritime and Ocean Engineering Research Inst., Korea Institute of Ocean Science and Technology

 

7.        Dong Hwan Kim

Thesis Title: 전산유체역학을 이용한 손상상태 크루즈선의 침수현상, 자유 횡동요 감쇠 그리고 규칙 파랑 중 운동 시뮬레이션 (Simulation of Flooding Procedure, Free Roll Decay and Motion in Regular Wave for Damaged Cruise Ship using Computational Fluid Dynamics)

Year Degree Conferred: 2013

Current Affiliation: Univ. of Iowa (Ph.D. course)

 

8.        Taegu Lim

Thesis Title: 손상 선박의 선수파 중 SRTP 실험을 위한 6자유도 운동 계측 시스템 구축 (Development of 6DOF Motion Measurement System for SRTP Test of a Damaged Ship in Head Seas)

Year Degree Conferred: 2014

Current Affiliation: Korea Research Institute of Ship and Ocean Engineering

 

9.        Mi Yeon Park

Thesis Title: 풍상 범주 중인 세일링 요트의 세일 변형 해석 및 자세를 고려한 속도 추정 방법 개발 (Sail Deformation Analysis and Velocity Prediction Considering Sailing Attitudes of an Upwind Sailing Yacht)

Year Degree Conferred: 2014

Current Affiliation: Daewoo Shipbuilding and Marine Engineering Co., Ltd.

 

10.    Sung Taek Park

Thesis Title: SPIV를 이용한 조류발전터빈의 후류유동 계측 및 상호상관면 중첩법을 이용한 SPIV 해석 알고리즘 개발 (The SPIV Measurement of Wake Flow in Current Turbine and Development of PIV Algorithm Using Reiterated Method of Cross-Correlation Plane)

Year Degree Conferred: 2014

Current Affiliation:

 

11.        Marco Polo Espinoza Haro

Thesis Title: Numerical Simulation of Self-Propelling Damaged Cruise Ship in Head/Following Seas Using Computational Fluid Dynamics

Year Degree Conferred: 2016

Current Affiliation: Korea Research Institute of Ship & Ocean Engineering

 

12.        Gwanhoon Kim

Thesis Title: 실험계획법을 CFD에 적용한 부가저항 감소 목적의 선수형상 최적화 연구 (Bow Design Parameter Optimization for Added Resistance Reduction by Applying the Design of Experiments to CFD)

Year Degree Conferred: 2017

Current Affiliation: Hyundai Heavy Industries Co., Ltd.

 

13.        Hak-Kyu Choi

Thesis Title: 전산유체역학 해석을 통한 수면관통물체 주위 유동의 LES/RANS 해석 (LES/RANS Analysis around a Surface-Piercing Body Using Computational Fluid Dynamics)

Year Degree Conferred: 2017

Current Affiliation: LG electronics

 


Publications/Presentations

Book

1.      S.H. Rhee, and H. Kim, “교양으로 읽는 조선공학,” Jisungsa, October 2014, ISBN 978-89-7889-288-9, Translation of “Naval Architecture for Non-Naval Architect,” Harry Benford, SNAME.

 

 

International Journals

 

1.       K.Ezhilsabareesh, S.H.Rhee, and A.Samad, “Shape Optimization of a Bidirectional Impulse Turbine via Surrogate Models”, Engineering Applications of Computational Fluid Mechanics, Vol. 12, June 2017, pp 1-12. 

 

2.       P.Halder, S.H.Rhee, and A.Samad, “Numerical Optimization of Wells Turbine for Wave Energy Extraction”, International Journal of Naval Architecture and Ocean Engineering, Vol. 9, Is. 1, January 2017, pp.11-24.

 

3.       S.Park, J.Yang, and S.H.Rhee, “Parametric Study on Ship’s Exhaust-Gas Behavior Using Computational Fluid Dynamics,” Engineering Applications of Computational Fluid Mechanics, Vol. 11, Is. 1, January 2017, pp.159-171.

 

4.       J.Seo, S.-J.Lee, B.Han, and S.H.Rhee, “Influence of Design Parameter Variations for Propeller-Boss-Cap-Fins on Hub Vortex Reduction,” Journal of Ship Research, Vol. 60, No. 4, December 2016, pp.1-16.

 

5.       J.Seo, S.-J.Lee, W.-S.Choi, S.T.Park, and S.H.Rhee, “Experimental Study on Kinetic Energy Conversion of Horizontal Axis Tidal Stream Turbine,” Renewable Energy, Vol. 97, November 2016, pp784-797.

 

6.       J.Seo, H.-K.Choi, U.-C.Jeong, D.K.Lee, S.H.Rhee, C.-M.Jung, and J.Yoo, “Model Tests on Resistance and Seakeeping Performance of Wave-Piercing High-Speed Vessel with Spray Rails,” International Journal of Naval Architecture and Ocean Engineering, Vol. 8, Is. 5, September 2016, pp.442-455.

 

7.       H.Sadat-Hosseini, D.-H.Kim, P.M.Carrica, S.H.Rhee, and F.Stern, “URANS Simulations for a Flooded Ship in Calm Water and Regular Beam Waves,” Ocean Engineering, Vol. 120, July 2016, pp.318-330.

 

8.       S.Park, S.Park, and S.H.Rhee, “Influence of Blade Deformation and Yawed Inflow on Performance of a Horizontal Axis Tidal Stream Turbine,” Renewable Energy, Vol. 92, July 2016, pp.321-332.

 

9.       A.Fujimua, A.Soloviev, S.H.Rhee, and R.Romeiser, “Coupled Model Simulation of Wind Stress Effect on Far Wakes of Ships in SAR Images,” IEEE Transactions on Geoscience and Remote Sensing, Vol. 54, No. 5, May 2016, pp. 2543-2551.

 

10.   J.Seo, D.M. Seol, B.Han, and S.H.Rhee, “Turbulent Wake Field Reconstruction of VLCC Models Using Two-dimensional Towed Underwater PIV Measurements,” Ocean Engineering, Vol. 118, May 2016, pp.28-40.

 

11.   S.Park, H.Lee, and S.H.Rhee, “Numerical Investigation of Anti-Diffusion Source Term for Free-Surface Wave Flow,” Journal of Advanced Research in Ocean Engineering, April 2016, pp.48-60

 

12.   H.Lee, M.Y.Park, S.Park, and S.H.Rhee, “Prediction of Velocity and Attitude of a Yacht Sailing Upwind by Computational Fluid Dynamics,” International Journal of Naval Architecture and Ocean Engineering, Vol. 8, Is. 1, January 2016, pp.1-12.

 

13.   S.Lee, J.-M.You, H.-H.Lee, T.Lim, S.T.Park, J.Seo, S.H.Rhee, and K.-P.Rhee, “Experimental Study on the Six Degree-of-Freedom Motions of a Damaged Ship Floating in Regular Waves,” IEEE Journal of Oceanic Engineering, Vol. 41, No. 1, January 2016, pp.40-49.

 

14. Park, G.Oh, S.H.Rhee, B.-Y.Koo, and H.B.Lee, “Full Scale Wake Prediction of an Energy Saving Device by Using Computational Fluid Dynamics,” Ocean Engineering, Vol. 101, June 2015, pp.254-263.

 

15.   S.Park and S.H.Rhee, “Comparative Study of Incompressible and Isothermal Compressible Flow Solvers for Cavitating Flow Dynamics,” Journal of Mechanical Science and Technology, Vol. 29, Is. 8, May 2015, pp.3287-3296.

 

16.   H.B.Lee and S.H.Rhee, “A Dynamic Interface Compression Method for VOF Simulations of High-Speed Planing Watercraft,” Journal of Mechanical Science and Technology, Vol. 29, Is. 5, May 2015, pp.1849-1857.

 

17.   S.Matt, A.Fujimura, A.Soloviev, S.H.Rhee, and R.Romeiser, “Fine-Scale Features on the Sea Surface in SAR Satellite Imagery – Part II: Numerical Modeling,” Ocean Science, Vol. 10, June 2014, pp.427-438.

 

18.   D.M.Seol, J.H.Seo and, S.H.Rhee, “Towed Underwater PIV Measurement for Free-Surface Effects on Turbulent Wake of a Surface-Piercing Body,” International Journal of Naval Architecture and Ocean Engineering, Vol. 5, September 2013, pp.404-413.

 

19.   S.Park, S.W.Park, S.H.Rhee, S.B.Lee, J.-E.Choi, and S.H.Kang, “Investigation on the Wall Function Implementation for the Prediction of Ship Resistance,” International Journal of Naval Architecture and Ocean Engineering, Vol. 5, March 2013, pp.33-46.

 

20.   S.Park and S.H.Rhee, “Numerical Analysis of the Three-Dimensional Cloud Cavitating Flow around a Twisted Hydrofoil,” Fluid Dynamics Research, Vol. 45, February 2013, pp.1-20.

 

21.   S.Park and S.H.Rhee, “Computational Analysis of Turbulent Super-Cavitating Flow Around a Two-Dimensional Wedge-Shaped Cavitator Geometry,” Computers and Fluids, Vol. 70, November 2012, pp.73-85.

 

22.   M.Song, M.-C.Kim, I.-R.Do, S.H.Rhee, J.H.Lee, and B.-S.Hyun, “Numerical and Experimental Investigation on the Performance of Three Newly Designed 100 kW-Class Tidal Current Turbines,” International Journal of Naval Architecture and Ocean Engineering, Vol. 4, No. 3, September 2012, pp.241-255.

 

23.   J.H.Lee, S.Park, D.H.Kim, S.H.Rhee, and M.-C.Kim, “Computational Methods for Performance Analysis of Horizontal Axis Tidal Stream Turbines,” Applied Energy, Vol. 98, October 2012, pp.512-523.

 

24.   S.Lee, J.-M.You, H.-H.Lee, T.Lim, S.H.Rhee, and K.-P.Rhee, “Preliminary Tests of a Damaged Ship for CFD Validation,” International Journal of Naval Architecture and Ocean Engineering, Vol. 4, No. 2, June 2012, pp.172-181.

 

25.   H.-H.Lee, H.-J.Lim, and S.H.Rhee, “Experimental Investigation of Green Water on Deck for a CFD Validation Database,” Ocean Engineering, Vol. 42, Is. 1, January 2012, pp.47-60.

 

26.   H.B.Lee, B.J.Park, S.H.Rhee, J.H.Bae, K.W.Lee, and W.J.Jeong, “Liquefied Natural Gas Flow in the Insulation Wall of a Cargo Containment System and Its Evaporation,” Applied Thermal Engineering, Vol. 31, Is. 14-15, October 2011, pp.2605-2615.  

 

27.   S.Park, J.Heo, B.S.Yu, and S.H.Rhee, “Computational Analysis of Ship’s Exhaust Gas Flow and Its Application for Antenna Location,” Applied Thermal Engineering, Vol. 31, Is. 10, July 2011, pp.1689-1702.

 

28.   J.H.Seo, D.M.Seol, J.H.Lee, and S.H.Rhee, “Flexible CFD Meshing Strategy for Prediction of Ship Resistance and Propulsion Performance,” International Journal of Naval Architecture and Ocean Engineering, Vol. 2, No. 3, September 2010, pp.139-145.

 

29.   S.-E.Kim and S.H.Rhee, “Efficient Engineering Prediction of Turbulent Wing Tip Vortex Flows,” Computer Modeling in Engineering and Sciences, Vol. 62, No. 3, September 2010, pp.291-309.

 

30.   W.-J.Kim, J.Yoo, Z.Chen, S.H.Rhee, H.-R.Chi, and H.Ahn, “Hyrdo- and Aerodynamic Analysis for the Design of a Sailing Yacht,” Journal of Marine Science and Technology, Vol. 15, No. 3, September 2010, pp.230-241.

 

31.   S.H.Rhee, C.M.Lee, H.B.Lee, and J.Oh, “Rudder Gap Cavitation: Fundamental Understanding and Its Suppression Devices,” International Journal of Heat and Fluid Flow, Vol. 31, Is. 4, August 2010, pp.640-650.

 

32.   H.J.Jung, J.H.Lee, S.H.Rhee, M.Song, and B.S.Hyun, “Unsteady Flow Around a Two-Dimensional Section of a Vertical Axis Turbine for Tidal Stream Energy Conversion,” International Journal of Naval Architecture and Ocean Engineering, Vol. 1, No. 2, December 2009, pp.64-69.

 

33.   S.H.Rhee, “Unsteady Reynolds Averaged Navier-Stokes Method for Free-Surface Wave Flows Around Surface-Piercing Cylindrical Structures,” ASCE Journal of Waterway, Port, Coastal, and Ocean Engineering, Vol. 135, Is. 4, July 2009, pp.135-143.

 

34.   J.Yang, S.H.Rhee, and H.Kim, “Propulsive Performance of a Tanker Hull Form in Damaged Conditions,” Ocean Engineering, Vol. 36, Is. 2, February 2009, pp.133-144.

 

35.   J.Oh, C.Lee, H.B.Lee, S.H.Rhee, J.-C.Suh, and H.Kim, “Rudder Gap Cavitation Suppression Using Gap Flow Blocking Devices,” Journal of Ship and Ocean Technology, Vol. 12, No. 4, December 2008, pp.20-31.

 

36.   S.H.Rhee and H.Kim, “A Suggestion of Gap Flow Control Devices for the Suppression of Rudder Cavitation,” Journal of Marine Science and Technology, Vol. 13, No. 4, November 2008, pp.356-370.

 

37.   P.J.Zwart, P.G.Godin, J.Penrose, and S.H.Rhee, “Simulation of Unsteady Free-Surface Flow Around a Ship Hull Using a Fully Coupled Multi-Phase Flow Method,” Journal of Marine Science and Technology, Vol. 13, No .4, November 2008, pp.346-355.

 

38.   B.Sasanapuri, V.S.Shirodkar, W.Wilson, S.Kadam, and S.H.Rhee, “A RANS Based Approach for Resistance, Maneuvering, and Seakeeping,” Journal of Ship and Ocean Technology, Vol. 11, No. 4, June 2007, pp.55-71.

 

39.   Y.Kim, S.H.Rhee, and S.-M.Jee, “Wing-In-Ground Effect on Free Surface,” Journal of Ship and Ocean Technology, Vol. 11, No. 3, 2007, pp.39-50.

 

40.   S.H.Rhee and C.Skinner, “Unstructured Grid Based Navier-Stokes Solver for Free-Surface Flow around Surface Ships,” Transactions of Royal Institution of Naval Architect, International Journal of Maritime Engineering, Vol. 148, Part A4, 2006, pp.1-18.

 

41.   S.H.Rhee, B.Makarov, H.Krishnan, and V.Ivanov, “Assessment of Volume of Fluid Method for Free-Surface Wave Flows,” Journal of Marine Science and Technology, Vol. 10, No. 4, December 2005, pp.173-180.

 

42.   S.H.Rhee and E.Koutsavdis, “Two-Dimensional Simulation of Unsteady Marine Propulsor Blade Flow Using Dynamic Meshing Techniques,” Computers and Fluids, Vol. 34, Is. 10, December 2005, pp.1152-1172.

 

43.   T.Kawamura, T.Watanabe, and S.H.Rhee, “Cavitation in the wake of a ship,” Naval Architect, The Royal Institute of Naval Architects, September 2005, p.118.

 

44.   S.H.Rhee, T.Kawamura, and H.Li, “Propeller Cavitation Study Using an Unstructured Grid Based Navier-Stokes Solver,” ASME Journal of Fluids Engineering, Vol. 127, No. 5, May 2005, pp.986-994.

 

45.   S.H.Rhee and S.Joshi, “Computational Validation for Flow around a Marine Propeller Using Unstructured Mesh Based Navier-Stokes Solver,” JSME International Journal, Series B, Vol. 48, No. 3, February 2005, pp.562-570.

 

46.   S.H.Rhee, “Unstructured Grid Based RANS Method for Liquid Tank Sloshing,” ASME Journal of Fluids Engineering, Vol. 127, No. 3, February 2005, pp572-582.

 

47.   S.H.Rhee, S.-E.Kim, H.Ahn, J.Oh, and H.Kim, “Analysis of a Jet-Controlled High-Lift Hydrofoil with a Flap,” Ocean Engineering, Vol. 30, Issue 16, October 2003, pp.2117-2136.

 

48.   S.H.Rhee and T.Hino, “Numerical Simulation of Unsteady Turbulent Flow Around a Maneuvering Prolate Spheroid,” AIAA Journal, Vol. 40, No. 10, October 2002, pp.2017-2026.

 

49.   S.H.Rhee and F.Stern, “RANS Model of Spilling Breaking Waves,” ASME Journal of Fluids Engineering, Vol. 124, No. 2, May 2002, pp.424-432.

 

50.   S.H.Rhee and F.Stern, “Unsteady RANS Method for Surface Ship Boundary Layer and Wake and Wave Field,” International Journal for Numerical Methods in Fluids, Vol. 37, September 2001, pp.445-478.

 

51.   S.H.Rhee and T.Hino, “Computational Investigation of 3D Turbulent Flow Separation around a Spheroid using an Unstructured Grid Method,” Journal of Society of Naval Architects of Japan, Vol. 188, September 2000, pp.1-9.


Domestic Journals

 

1.        J.Shin, S.H.Rhee, J.Eune, E.Cho, A.Beik, S.Jo, and B.Y.Lee, “공학 창의성에 영향을 미치는 예술경험의 속성 탐색 (The Characteristics of Artistic Experience Affecting on Engineering Creativity),” Journal of Creativity Education (창의력교육연구), Vol. 17, No. 1,  May  2017, pp. 1-25.

 

2.        J.-H.Kim, J.Seo, H.-G.Kim, C.Kim, G.Yoo, S.H.Rhee, and C.-W.Park, “케이슨의 예인 안정성 평가를 위한 모형 시험 시스템과 해석 기법의 개발 (Development of a Model Test System and Analysis Method for Assessing Towing Stability of a Caisson in Wet Towing),” Journal of the Korean Society for Marine Environment and Energy (한국해양환경•에너지학회지), Vol. 19, No. 4, November 2016, pp.259-265.

 

3.        S.Park, E.Cho, B.Lee, J.Shin, and S.H.Rhee, “공학 분야 역할모델의 현황과 전문성 계발에 미치는 영향 (Current States and Effects of Role Model on the Expertise Development in Engineers),” Journal of Engineering Education Research (공학교육연구), Vol. 19, No. 3, May 2016, pp.3-12.

 

4.       S.H.Ko, H.K.Choi, H.B.Lee, and S.H.Rhee, “아이스하버식 어도 내 수리특성에 대한 수치해석 연구 (Numerical Analysis of the Hydraulic Characteristics of Ice-Harbor Type Fishway),” Journal of Computational Fluids Engineering, (한국전산유체공학회지), Vol. 20, No. 3, September 2015, pp.15-19.

 

5.       S.Park and S.H.Rhee, “오픈 소스 라이브러리를 이용한 수치수조 구현 및 적용 (Development of Numerical Tank Using Open Source Libraries and Its Application),” Journal of The Korean Society of Marine Environment and Safety (해양환경안전학회지), Vol. 20, No. 6, December 2014, pp.746-751.

 

6.        D.J.Kim, S.Y.Kim, S.H.Kim, J.Seo, and S.H.Rhee, “고속 활주선의 선형에 따른 저항성능 및 규칙파 중 운동 성능 고찰 (Effects of Hull Form Variations on Resistance and Seakeeping Performance of Planing Hulls with and without Incoming Regular Waves),” Journal of Society of Naval Architects of Korea (대한조선학회 논문집), Vol. 51, No. 5, October 2014, pp.369-379.

 

7.        M.Y.Park, H.B.Lee, S.Park, and S.H.Rhee, “풍상 범주 중인 세일링 요트의 자세를 고려한 속도 추정 방법 (Numerical Method for Velocity Prediction Considering Motion of a Yacht),” Journal of the Korean Society of Computational Fluids Engineering (한국전산유체공학회지), Vol. 19, No. 3, September 2014, pp.1-7.

 

8.        B.R.Shin, S.Park, and S.H.Rhee, “캐비테이션 유동해석을 위한 기-액 2상 국소균질 모델  제2보 : 기-액 2상 매체 중의 고속유동현상 (Gas-Liquid Two-Phase Homogeneous Model for Cavitating Flow  Part II. High Speed Flow Phenomena in Gas-Liquid Two-Phase Media),” Journal of the Korean Society of Computational Fluids Engineering (한국전산유체공학회지), Vol. 19, No. 3, September 2014, pp.91-97.

 

9.        J.Shin, S.Jin, S.H.Rhee, S.Park, Y.-E.Kim, and S.-H.Kim, “전문성 수준에 따른 목표 내용 및 추구 특성 차이 연구 : 공학 분야와 예술 분야를 중심으로 (A Study on the Difference in Goal Contents and Goal-Seeking Processes According to Expertise Levels of Professional Engineers and Artists),” The Korean Journal of Educational Psychology (교육심리연구), Vol. 28, No. 3, September 2014, pp.455-476.

 

10.    S.Park, G.Oh, S.H.Rhee, B.-Y.Koo, and H.Lee, “스케일 변화에 따른 전류고정날개의 영향 수치해석 (Numerical Study of Pre-Swirl Stator for Model and Full Scales),” Journal of the Korean Society for Marine Environment and Energy (한국해양환경·에너지학회지), Vol. 17, No. 3, August 2014, pp.205-211.

 

11.    J.Seo, D.M.Seol, B.W.Han, G.Yoo, T.G.Lim, S.T.Park, and S.H.Rhee, “예인수조용 스테레오스코픽 입자영상유속계 시스템의 불확실성 해석 (Uncertainty Assessment of a Towed Underwater Stereoscopic PIV System),” Journal of Society of Naval Architects of Korea (대한조선학회 논문집), Vol. 51, No. 4, August 2014, pp. 311-320.

 

12.    J.Seo, G.Yoo, T.G.Lim, D.M.Seol, B.W.Han, and S.H.Rhee, “입자영상유속계를 이용한 자항상태 모형선의 프로펠러 후류 계측 (Propeller Wake Measurement of a Model Ship in Self Propulsion Condition using Towed Underwater PIV),” Journal of Society of Naval Architects of Korea (대한조선학회 논문집), Vol. 51, No. 4, April 2014, pp. 171-177.

 

13.    S.W.Park, S.Park, and S.H.Rhee, “유체-구조 연성을 고려한 100kW급 수평축 조류발전 터빈의 단독성능 해석 (Fluid-Structure Interaction Analysis for Open Water Performance of 100 kW Horizontal Tidal Stream Turbine),” Journal of the Korean Society for Marine Environment and Energy (한국해양환경·에너지학회지), Vol. 17, No. 1, February 2014, pp.20-26.

 

14.    S.Park, S.H.Rhee, and B.R.Shin “반구형 전두부 실린더에서 발생하는 캐비테이션 유동의 압축성 효과에 대한 수치해석 연구 (Numerical Analysis of Cavitation with Compressibility Effects Around Hemispherical Head-Form Body),” Journal of the Korean Society of Computational Fluids Engineering (한국전산유체공학회지), Vol. 18, No. 4, December 2013, pp.9-16.

 

15.    J.Shin, S.Park, Y.-K.Lee, S.-I.Shin, and S.H.Rhee, “공학전문가 목표인식검사 개발 및 타당화 (Development of a goal questionnaire for engineering experts),” The Korean Journal of Education Psychology (교육심리연구), Vol. 26, No. 2, June 2012, pp.353-376.

 

16.    S.Park, S.W.Park, S.H.Rhee, S.B.Lee, J.-E.Choi, and S.H.Kang, “소스공개 라이브러리를 활용한 선박 저항계산 CFD 코드 개발 (CFD code development for the prediction of the ship resistance using open source libraries),” Journal of the Korean Society of Computational Fluids Engineering (한국전산유체공학회지), Vol. 17, No. 2, June 2012, pp.21-27.

 

17.    D.H.Lee, B.S.Hyun, J.K.Lee, M.C.Kim, and S.H.Rhee, “수직축 조류발전 터빈의 유체공학적 용량 산정기법 개발 (Development of Hydrodynamic Capacity Evaluation Method for a Vertical-Axis Tidal Stream Turbine),” Journal of Korea Society of Marine Environmental Engineering (한국해양환경공학회지), Vol. 15, No. 2, May 2012, pp.142-149.

 

18.    S.Park and S.H.Rhee, “소스공개 라이브러리를 활용한 조선 및 해양 산업용 CFD 코드 개발 (CFD Code Development Using Open Source Libraries for Shipbuilding and Marine Engineering Industries),” Journal of Society of Naval Architects of Korea (대한조선학회 논문집), Vol. 49, No. 2, April 2012, pp. 43-49.

 

19.    H.-J.Lim, H.-H.Lee, S.Park, and S.H.Rhee, “FPSO 선수부 갑판침수 현상에 대한 실험 및 수치적 검증 (Experimental and Numerical Validation for FPSO Bow Water Shipping),” Journal of Society of Naval Architects of Korea (대한조선학회 논문집), Vol. 49, No. 1, January 2012, pp. 6-13.

 

20.    S.Lee, J.-M.You, H.-H.Lee, S.H.Rhee, and K.-P.Rhee, “CFD 검증용 데이터베이스 구축을 위한 손상 선박의 횡동요 감쇠 운동에 대한 실험적 연구 (Experimental Study on Free Roll Decay Motions of a Damaged Ship for CFD Validation Database),” Journal of Society of Naval Architects of Korea (대한조선학회 논문집), Vol. 49, No. 1, January 2012, pp. 52-59.

 

21.    S.Park, J.H.Seo, D.H.Kim, and S.H.Rhee, “추진기 날개 끝 형상변화에 따른 보오텍스 유동에 대한 수치해석 (Numerical Analysis of a Tip Vortex Flow for Propeller Tip Shapes),” Journal of Society of Naval Architects of Korea (대한조선학회 논문집), Vol. 48, No. 6, December 2011, pp. 501-508.

 

22.    S.Park and S.H.Rhee, “3차원 비틀어진 날개 주위의 비정상 공동 유동에 대한 수치적 연구 (Numerical Investigation of Unsteady Cavitating Flow on a Three-Dimensional Twisted Hydrofoil),” Journal of Korea Society of Computational Fluids Engineering (한국전산유체공학회지), Vol. 16, No. 3, September 2011, pp.37-46.

 

23.    H.B.Lee, S.H.Rhee, and J.H.Yoo, “변형을 고려한 요트 세일의 2차원 단면 해석 (Analysis of a Two-Dimensional Section of Deforming Yacht Sails),” Journal of Society of Naval Architects of Korea (대한조선학회 논문집), Vol. 48, No. 4, August 2011, pp.308-316.

 

24.    J.S.Han, D.H.Choi, B.S.Hyun, M.C.Kim, S.H.Rhee, and M.Song, “헬리컬 터빈의 설계인자에 따른 성능 연구 (Parametric Numerical Study on the Performance of Helical Tidal Stream Turbines),” Journal of Korea Society of Marine Environmental Engineering (한국해양환경공학회지), Vol. 14, No. 2, May 2011, pp.114-120.

 

25.    S.Park and S.H.Rhee, “2차원 및 축대칭 운동체 주위의 초공동 현상에 대한 수치해석 (Numerical Analysis of Super-Cavitating Flow around Tow-Dimensional and Axisymmetric Bodies),” Journal of Korea Society of Computational Fluids Engineering (한국전산유체공학회지), Vol. 16, No. 1, March 2011, pp.183-189.

 

26.    J.H.Lee, S.H.Rhee, D.S.Jun, H.R.Chi, and Y.S.Kim, “초기 선형 설계를 위한 자동화 툴 개발 (Automatic Tool Development for Initial Hull Form Design),” Journal of Society of Naval Architects of Korea (대한조선학회 논문집), Vol. 47, No. 6, December 2010, pp.713-769.

 

27.    J.S.Han, B.S.Hyun, D.H.Choi, J.O.Mo, M.C.Kim, and S.H.Rhee, “파라메트릭 스터디를 통한 조류발전용 다리우스 터빈의 설계연구 (Study on Design of Darrieus-Type Stream Turbine Using Parametric Study),” Journal of Korea Society of Marine Environmental Engineering (한국해양환경공학회지), Vol. 13, No. 4, November 2010, pp.241-248.

 

28.    B.C.Shin, M.C.Kim, I.R.Do, S.H.Rhee, B.S.Hyun, and S.H.Rhee, “조류발전용 팁 레이크 HAT 임펠러 성능 수치해석 연구 (A Numerical Study on Tip Rake HAT Impeller Performance for Tidal Stream Power),” Journal of Korea Society of Marine Environmental Engineering (한국해양환경공학회지), Vol. 13, No. 4, November 2010, pp.263-269.

 

29.    S.Park and S.H.Rhee, “전산유체역학을 위한 공동 모델의 특성 조사 (Investigation for the characteristics of cavitation modeling for Computational Fluid Dynamics),” Journal of Society of Naval Architects of Korea (대한조선학회 논문집), Vol. 47, No. 5, October 2010, pp.657-669.

 

30.    M.C.Kim, B.C.Shin, J.H.Lee, S.H.Rhee, B.S.Hyun, and J.H.Nam, “HAT 임펠러 설계 비교 연구 (Comparative Study on Horizontal Axis Turbine (HAT) Impeller Design),” Journal of Korea Society of Marine Environmental Engineering (한국해양환경공학회지), Vol. 13, No. 2, May 2010, pp.105-111.

 

31.    C.M.Lee, J.Oh, and S.H.Rhee, “타 간극 캐비테이션과 저감장치에 관한 2차원 모형 실험 (Two-Dimensional Model Tests for Rudder Gap Cavitation and Suppression Devices),” Journal of Society of Naval Architects of Korea (대한조선학회 논문집), Vol. 47, No. 2, April 2010, pp. 122-131.

 

32.    J.H.Lee, B.J.Park, and S.H.Rhee, “Hybrid mesh 및 sliding mesh를 이용한 선박 저항추진 성능 시험 (Ship Resistance and Propulsion Performance Test Using Hybrid Mesh and Sliding Mesh),” Journal of Korea Society of Computational Fluids Engineering (한국전산유체공학회지), Vol. 15, No. 1, March 2010, pp.81-87.

 

33.    H.H.Lee, H.J.Lim, and S.H.Rhee, “FPSO 갑판 침입수 현상에 대한 선수부 형상 영향의 실험적 고찰 (Experimental Investigation of the Bow Configuration Influence on the Green Water on FPSO),” Journal of Ocean Engineering and Technology (한국해양공학회지), Vol. 23, No. 5, October 2009, pp.9-14.

 

34.    B.J.Park, H.B.Lee, S.H.Rhee, J.H.Bae, K.W.Lee, S.J.An, and W.J.Jeong, “극저온 유체 화물창 방벽 내의 액체유동 및 기화 시뮬레이션 (Liquid Flow and Evaporation Simulation of Cryogenic Fluid in the Wall of Cryogenic Fluid Cargo Containment System),” Journal of Korea Society of Computational Fluids Engineering (한국전산유체공학회지), Vol. 14, No. 2, June 2009, pp.9-18.

 

35.    H.J.Jung, S.H.Rhee, M.Song, and B.S.Hyun, “조류발전용 수직축 터빈 주위의 비정상 유동 수치해석 (A Numerical Study of Unsteady Flow around a Vertical Axis Turbine for Tidal Current Energy Conversion),” Journal of Korea Society of Marine Environmental Engineering (한국해양환경공학회지), Vol. 12, No. 1, February 2009, pp.9-14.

 

36.    J.Yang, S.H.Rhee, and H.Kim, “대형유조선의 저항추진성능에 미치는 자세변화의 영향에 관한 연구 (A Study on the Effect of the Heeled and Trimmed Conditions on Propulsive Performance of VLCC),” Journal of Society of Naval Architects of Korea (대한조선학회 논문집), Vol. 43, No. 3, June 2006, pp.275-284.


International Conferences

 

1.    W.C.Seok, H.K.Choi, J.Seo, I.D.Suh, and S.H.Rhee, “Large Eddy Simulation of Wave-induced Seperation around a Slender Surface-piercing Body,” The 12th International OpenFOAM Workshop(OFW12), Exeter, UK,  July 24-27, 2017.

 

2.    J.Seo, A.Samad, and S.H.Rhee, “Free-Surface Turbulent Wake of a Surface-Piercing Slender Body at Various Froude Numbers,” 69th Annual Meeting of the APS Division of Fluid Dynamics (APS DFD), Portland, OR, November 20-22, 2016.

 

3.    P.Halder, A.Samad, S.H.Rhee, K.Y.Kim, and H.-S.Shim, “Wave Energy Harvesting Turbine: Effect of Solidity,” 7th International Symposium on Fluid Machinery and Fluids Engineering (ISFMFE 2016), Jeju, Korea, October 18-22, 2016.

 

4.    J.Seo, M.P.Espinoza Haro, C.Santiago Bravo, H.-K.Choi, K.-P.Rhee, and S.H.Rhee, “Course-Keeping Tests for Safe-Return-to-Port of a Damaged Passenger Ship,” 31st Symposium on Naval Hydrodynamics, Monterey, CA, September 11-16, 2016.

 

5.    J.Seo, M.P.Espinoza Haro, and S.H.Rhee, “Experiments and CFD analysis on Safe-Return-to-Port of a Damaged Ship in Head and Following Seas,” ASME Paper FEDSM 2016-7727, ASME 2016 Fluids Engineering Division Summer Meeting (FEDSM2016), Washington, DC, July 10-14, 2016.

 

6.    J.Seo, B.Han, S.H.Rhee, S.-J.Lee, H.Kim, J.Kim, K.Kwon, and J.Park, “Parametric Study on Hub Vortex Reducing Effects of Propeller Boss Cap Fins by Force and Wake Field Measurements in Open Water and Self-Propulsion Conditions,” ASME Paper OMAE2016-54858, The 35th International Conference on Ocean, Offshore and Artic Engineering, Busan, Korea, June 19-24, 2016.

 

7.    G.H.Kim, H.J.Shin, J.Seo, and S.H.Rhee, “A Numerical Study on Correlation between the Bow Design Parameters and Added Resistance Using the Design of Experiments,” ASME Paper OMAE2016-54861, The 35th International Conference on Ocean, Offshore and Artic Engineering, Busan, Korea, June 19-24, 2016.

 

8.    B.Han, J.Seo, S.J.Lee, and S.H.Rhee, “Parametric Study on Hub Vortex Reducing Effects of Propeller Boss Cap Fins by Force and Wake Field Measurements,” 16th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC 16), Honolulu, HI, April 10-15, 2016.

 

9.    J.Seo and S.H.Rhee, “Reynolds Number Effects on Free Surface Wave Induced Separation around a Surface Piercing Slender Cylinder,” 3rd International Conference on Violent Flows (ICVF 2016), Osaka Prefecture University, Osaka, Japan, March 9-11, 2016.

 

10.    S.Park, H.B.Lee, H.-K.Choi, S.H.Rhee, Y.Choe, H.Kim, C.Kim, J.-H.Kim, B.K.Ahn, and H.T.Kim, “Cavity Dynamics behind 2-D Wedge in Incompressible and Compressigle Flows,” 9th International Symposium on Cavitation (CAV 2015), Ecole Polytechnique Federale de Laussanne, Switzerland, December 6-10, 2015.

 

11.    J.Seo, C.Santiago, and S.H.Rhee, “Model Tests for Sate-Return-to-Port of a Damaged Ship in Waves,” World Maritime Technology Conference 2015 (WMTC 2015), Providence, RI, November 3-7, 2015.

 

12.    J.Seo, S.J.Lee, and S.H.Rhee, “Wake Field Measurement of a Horizontal Axis Tidal Stream Turbine in Various Loading Conditions,” 5th Asis-Pacific Forum on Renewable Energy (AFORE 2015), Jeju, Korea, November 4-7, 2015.

 

13.    J.Seo, B.Han, and S.H.Rhee, “Towed Underwater SPIV Measurements of Flow Fields around a Surface-Piercing Cylinder with Free Surface Effects,” ASME Paper AJK2015-20165, ASME-JSME-KSME Joint Fluids Engineering Conference 2015 (AJK2015-FED), Seoul, Korea, July 26-31, 2015.

 

14.    H.B.Lee and S.H.Rhee, “A Study of Computational Schemes for Six Degree-of-Freedom Motion of a Ship in Waves Using OpenFOAM,” The 10th International OpenFOAM Workshop, University of Michigan, Ann Arbor, MI, June 29 – July 2, 2015.

 

15.    H.B.Lee and S.H.Rhee, “A New Dynamic Interface Compression Method for Free-Surface Flows Around High-Speed Planing Craft,” 6th International Conference on Computational Methods in Marine Engineering (MARINE 2015), Rome, Italy, June 15-17, 2015.

 

16.     J.H.Seo, T.G. Lim, S.T.Park, and S.H.Rhee, “Free Running Model Tests of a Damaged Ship in Head and Following Seas,” The 12th International Conference on the Stability of Ships and Ocean Vehicles (STAB 2015), University of Strathclyde,  Glasgow, UK, June 14-19, 2015.

 

17.     H.Sadat-Hosseini, D.-H.Kim, P.Carrica, S.H.Rhee, and F.Stern, “URANS Simulations for a Flooded Ship in Calm Water and Regular Beam Waves,” The 12th International Conference on the Stability of Ships and Ocean Vehicles (STAB 2015), University of Strathclyde, Glasgow, UK, June 14-19, 2015.

 

18.     J.H.Seo, S.T.Park, and S.H.Rhee, “Experimental Study on Wake Fields of a Horizontal Axis Tidal Stream Turbine Model in Various Loading Conditions,” 4th International Symposium on Marine Propulsors (SMP’17), University of Texas at Austin, TX, May 31 – June 4, 2015.

 

19.    H.B.Lee and S.H.Rhee, “Improvement of Interface Compression Method for High Speed Surface Craft,” 2014 Korea-Japan CFD Workshop, Jinju, Korea, November 13-14, 2014.

 

20.    T.G. Lim, J.H.Seo, S.T.Park, and S.H.Rhee, “Experimental Study on the Safe-Return-to-Port of a Damaged Ship in Head Seas,” 30th Symposium on Naval Hydrodynamics, Tasmania, Australia, November 2-7, 2014.

 

21.    H.B.Lee and S.H.Rhee, “A Numerical Simulation of Running Attitude and Resistance of High Speed Surface Craft,” 10th Asian Computational Fluid Dynamics Conference (ACFD 10), Jeju, Korea, October 19-23, 2014.

 

22.    S.H.Park, G.Oh, and S.H.Rhee, “Full Scale Performance Prediction of an Energy Saving Device by Using Computational Fluid Dynamics,” 10th Asian Computational Fluid Dynamics Conference (ACFD 10), Jeju, Korea, October 19-23, 2014.

 

23.    S.Park, G.Oh, S.H.Rhee, B-Y.Koo, and H.B.Lee, “Numerical Analysis of Turbulent Flow around Energy Saving Pre-swirl Stator for Full and Model Scale Ships,” 5th European Conference on Computational Mechanics (ECCM V), Barcelona, Spain, July 20-25, 2014.

 

24.    H.B.Lee, S.H.Rhee, and S.H.Park, “Dynamic Interface Compression Method for High Speed Surface Craft,” The 9th International OpenFOAM Workshop, Zagreb, Croatia, June 23-26, 2014.

 

25.    J.H.Seo, D.M.Seol, T.Lim, S.T.Park, B.W.Han, and S.H.Rhee, “A Stereo PIV Measurement of a Model Ship Wake in a Towing Tank with Uncertainty Assessment,” The 10th International Symposium on Particle Image Velocimetry (PIV 13), Delft, Netherlands, July 2-4, 2013.

 

26.    H.B.Lee and S.H.Rhee, “Numerical Simulation of Wave Induced Motion of a Floating Body,” The 8th International OpenFOAM Workshop, Jeju, Korea, June 11-14, 2013.

 

27.    S.W.Park, S.Park, and S.H.Rhee, “Performance Predictions of a Horizontal Axis Tidal Stream Turbine Considering the Effects of Blade Deformation,” The 3rd International Symposium on Marine Propulsors (SMP’ 13), Tasmania, Australia, May 5-8, 2013.

 

28.    S.W.Park, S.Park, and S.H.Rhee, “Numerical Simulation of a Horizontal Axis Tidal Stream Turbine Considering the Effect of Blade,” 1st Asian Wave and Tidal Energy Conference, Jeju, Korea, November 27-30, 2012.

 

29.    S.Park and S.H.Rhee, “Development of practical formula for prediction of cavitation erosion,” 5th International Symposium on Fluid Machinery and Fluids Engineering, Jeju, Korea, October 24-27, 2012.

 

30.    H.Sadat-Hosseini, D.H.Kim, S.K.Lee, S.H.Rhee, P.Carrica, F.Stern, and K.-P.Rhee, “CFD and EFD Study of Damaged Ship Stability in Regular Waves,” 11th International Conference on the Stability of Ships and Ocean Vehicles, Athens, Greece, September 23-28, 2012.

 

31.    S.W.Park, S.Park, and S.H.Rhee, “Performance Analysis of Horizontal Axis Tidal Stream Turbine in Un-conventional Ambient Flows,” The 2012 International Conference on Advances in Wind and Structures, Seoul, Korea, August 26-29, 2012.

 

32.    S.Lee, J.-M.You, H.-H.Lee, S.H.Rhee, and K.-P.Rhee, “Experimental Study on the Six Degree-of-Freedom Motion of a Damaged Ship for CFD Validation,” 29th Symposium on Naval Hydrodynamics, Gothenburg, Sweden, August 26 – 31, 2012.

 

33.    S.Park and S.H.Rhee, “CFD Validation for Super-Cavitating Flow around Two-Dimensional Cavitators,” 29th Symposium on Naval Hydrodynamics, Gothenburg, Sweden, August 26 – 31, 2012.

 

34.    S.Park, S.H.Rhee, and B.R.Shin, “Pressure-Based Solver for Incompressible and Isothermal Compressible Flows with Cavitation,” 8th International Symposium on Cavitation, Singapore, August 13-16, 2012.

 

35.    S.Park and S.H.Rhee, “Incompressible and Compressible Flows with Cavitation,” 7th International OpenFOAM Workshop, Darmstadt, Germany, June 25-28, 2012.

 

36.    H.B.Lee and S.H.Rhee, “Libraries for 6-DOF Motion of a Floating Body,” 7th International OpenFOAM Workshop, Darmstadt, Germany, June 25-28, 2012.

 

37.    B.S.Hyun, J.K.Lee, D.H.Lee, S.H.Rhee, S.W.Park, M.C.Kim, I.R.Do, D.S.Cho, and M.Song, “On Development of Practical Design Tools for Tidal Stream Turbines,” Ocean 2012 MTS/IEEE Yeosu, Yeosu, Korea, May 21-24, 2012.

 

38.    S.W.Park, S.Park, and S.H.Rhee, “Fluid-Structure Interaction Analysis for Open Water Performance Prediction of Horizontal Axis Tidal Stream Turbine,” 8th KSME-JSME Thermal and Fluids Engineering Conference, Incheon, Korea, March 18-21, 2012.

 

39.    S.Park and S.H.Rhee, “Computational Analysis of Unsteady Cavitation on a Three-Dimensional Twisted Hydrofoil,” AIAA Paper 2012-1100, 50th AIAA Aerospace Sciences Meeting, Nashville, TN, January 9-12, 2012.

 

40.    S.W.Park and S.H.Rhee, “Numerical Analysis for fluid-structure interaction prediction of horizontal axis tidal stream energy conversion turbine,” 1st Asia-Pacific Forum on Renewable Energy, Seoul, Korea, November 16-19, 2011.

 

41.    G.S.Song, C.B.Hong, D.Y.Lee, Q.Miao, S.Park, and S.H.Rhee, “Numerical Simulation of a Stationary Cylinder in a Cross Flow from the Benchmark Study of ITTC Ocean Engineering Committee,” TEAM 2011 25th Technical Exchange and Advisory Meeting on Marine Structures, Incheon, Korea, September 26-29, 2011.

 

42.    A.Fujimura, S.Matt, A.Soloviev, C.Maingot, and S.H.Rhee, “The Impact of Thermal Stratification and Wind Stress on Sea Surface Features in SAR Imagery,” 2011 IEEE International Geoscience and Remote Sensing Symposium, Vancouver, Canada, July 25-29, 2011.

 

43.    J.H.Seo, D.M.Seol, and S.H.Rhee, “Towed Underwater PIV Measurement for Free-Surface Wave Effects on Turbulent Wake of a Surface-Piercing Body,” ASME Paper AJK2011-11022, Symposium on Non-Invasive Measurements in Single and Multiphase Flows, ASME-JSME-KSME Joint Fluids Engineering Conference 2011, Hamamatsu, Japan, July 2011.

 

44.    S.Park and S.H.Rhee, “Numerical Analysis of Super-Cavitating Flow Around a Two-Dimensional Cavitator Geometry,” ASME Paper AJK2011-33010, 46th Cavitation and Multiphase Flow Forum, ASME-JSME-KSME Joint Fluids Engineering Conference 2011, Hamamatsu, Japan, July 2011.

 

45.    J.H.Seo, D.M.Seol, and S.H.Rhee, “Underwater PIV Measurement and Uncertainty Assessment for Free-Surface Wave Effects on the Turbulent Wake of a Surface-Piercing Parabolic Body in Towing Tank,” AIAA Paper 2011-3727, 41st AIAA Fluid Dynamics Conference and Exhibit, Honolulu, Hawaii, June 27 – 30, 2011.

 

46.    S.Park and S.H.Rhee, “Numerical Analysis of Two-Dimensional Turbulent Super-Cavitating Flow around a Cavitator Geometry,” AIAA Paper 2011-3209, 20th AIAA Computational Fluid Dynamics Conference, Honolulu, Hawaii, June 27 – 30, 2011.

 

47.    S.Lee, J.-M.You, H.-H.Lee, S.H.Rhee, and K.P.Rhee, “Free Roll Decay Study of a Damaged Ship for CFD Validation,” ASME Paper OMAE2011-49315, 30th International Conference on Ocean, Offshore and Arctic Engineering, Rotterdam, The Netherlands, June 2011.

 

48.    J.H.Lee, D.H.Kim, S.H.Rhee, I.R.Do, B.C.Shin, and M.C.Kim, “Computational and Experimental Analysis of Horizontal Axis Marine Current Turbine Design,” 2nd International Symposium on Marine Propulsors (SMP’11), Hamburg, Germany, June 2011.

 

49.    J.H.Lee, D.H.Kim, and S.H.Rhee, “Horizontal Axis Tidal Stream Turbine Analysis Using Numerical Simulation,” AIAA Paper 2011-0130, 49th AIAA Aerospace Sciences Meeting, Orlando, FL, January 2011.

 

50.    S.Park and S.H.Rhee, “Heat and Fluid Flow Analysis of Ship’s Exhaust Gas,” 3rd Asian Conference on Mixing, Jeju, Korea, October 19 – 22, 2010.

 

51.    J.H.Lee, D.M.Seol, S.H.Rhee, H.R.Chi, D.S.Jun, and M.C.Ryu, “Automatic Tool Development for Ship Hull Form Parametric Study,” 11th International Symposium on Practical Design of Ships and Other Floating Structures (PRADS 2010), Rio de Janeiro, Brazil, September 19 – 24, 2010.

 

52.    J.H.Seo, J.H.Lee, B.J.Park, and S.H.Rhee, “Flexible Meshing Strategy for Prediction of Ship Resistance and Propulsion Performance,” 11th International Symposium on Practical Design of Ships and Other Floating Structures (PRADS 2010), Rio de Janeiro, Brazil, September 19 – 24, 2010.

 

53.    H.H.Lee, H.J.Lim, and S.H.Rhee, “Experimental Study of the Green Water on Floating Structures for CFD Validation,” 28th Symposium on Naval Hydrodynamics, Pasadena, CA, September 12 – 17, 2010.

 

54.    J.H.Lee, D.M.Seol, S.H.Rhee, H.R.Chi, D.S.Jun, and M.C.Ryu, “Hybrid Meshing Approach For a POD Propulsion Cruise Ship Resistance Performance Prediction,” AIAA Paper 2010-4730, 40th AIAA Fluid Dynamics Conference, Chicago, IL, June 27 – July 1, 2010.

 

55.    J.D.Kim, S.Y.Hong, S.H.Rhee, H.B.Lee, and J.H.Song, “Numerical Predictions of Hydrofoil Sheet Cavitation Noise Using CFD Analysis,” 39th International Congress and Exposition on Noise Control Engineering, Lisbon, Portugal, June 13 – 16, 2010.

 

56.    S.Matt, A.Fujimura, A.Soloviev, and S.H.Rhee, “Modification of Turbulence at the Air-Sea Interface Due to the Presence of Surfactants and Implications for Gas Exchange. Part II: Numerical Simulations,” 6th International Symposium on Gas Transfer at Water Surfaces, Kyoto, Japan, May 17-21, 2010.

 

57.    J.H.Lee, B.J.Park, D.M.Seol, S.H.Rhee, D.S.Jun, H.R.Chi, and M.C.Ryu, “Hybrid Meshing Approach for Resistance Performance Prediction of a POD Propulsion Cruise Ship,” ASCHT09-B45, 2nd Asian Symposium on Computational Heat Transfer and Fluid Flow, Jeju, Korea, October 2009.

 

58.    J.K.Oh, H.B.Lee, K.H.Shin, C.M.Lee, S.H.Rhee, J.C.Suh, and H.Kim, “Rudder Gap Flow Control for Cavitation Suppression,” CAV2009 Paper No. 70, 7th International Symposium on Cavitation, Ann Arbor, MI, August 2009.

 

59.    H.H.Lee and S.H.Rhee, “Numerical Parameters Influencing Two Dimensional Water Entry Simulations,” ISOPE-2009-TPC-246, 19th International Offshore and Polar Engineering Conference, Osaka, Japan, June 2009.

 

60.    H.B.Lee, B.J.Park, S.H.Rhee, J.H.Bae, K.W.Lee, S.J.An, and W.J.Jeong, “Cryogenic Fluid Flow in the Insulation Wall of the Cargo Containment System,” ASME Paper OMAE2009-79354, 28th International Conference on Ocean, Offshore and Arctic Engineering, Honolulu, HI, May 2009.

 

61.    S.H.Rhee, J.-K.Oh, C.M.Lee, and H.B.Lee, “Experimental and Computational Analysis of Rudder Gap Cavitation,” AIAA Paper 2009-1504, 47th AIAA Aerospace Sciences Meeting, Orlando, FL, January 2009.

 

62.    K.J.Maki, L.J.Doctors, R.M.Scher, W.M.Wilson, S.H.Rhee, A.W.Troesch, and R.F.Beck, “Conceptual Design and Analysis of a High-Speed Sealift Trimaran,” 2008 SNAME Maritime Technology Conference & Expo, Houston, TX, October 2008.

 

63.    J.-K.Oh, C.M.Lee, H.B.Lee, D.Seo, S.H.Rhee, J.-C.Suh, S.-H.Lee, and H.Kim, “Rudder Gap Cavitation Suppression Using Gap Flow Blocking Devices,” 3rd  Pan Asian Association of Maritime Engineering Society and Advanced Maritime Engineering Conference 2008, Chiba, Japan, October 2008.

 

64.    S.H.Rhee, J.-K.Oh, C.M.Lee, H.B.Lee, D.Seo, J.-C.Suh, S.-H.Lee, and H.Kim, “Concept Verification of Rudder Gap Cavitation Suppression Device through Experiments and Computations,” 27th Symposium on Naval Hydrodynamics, Seoul, Korea, October 2008.

 

65.    J.-K.Oh, C.M.Lee, H.B.Lee, D.Seo, S.H.Rhee, J.-C.Suh, S.-H.Lee, and H.Kim, “Rudder Gap Cavitation and its Suppression Devices,” ASME Fluids Engineering Division Summer Conference, Jacksonville, FL, August 2008.

 

66.    S.H.Rhee, J.-K.Oh, S.-H.Lee, and H.Kim, “Development of Rudder Cavitation Suppression Devices and its Concept Verification through Experimental and Numerical Studies,” 10th International Symposium on Practical Design of Ships and Other Floating Structures, Houston, TX, October 2007.

 

67.    P.J.Zwart, P.G.Godin, J.Penrose, and S.H.Rhee, “Ship Hull Simulations with ANSYS CFX,” 10th International Symposium on Practical Design of Ships and Other Floating Structures, Houston, TX, October 2007.

 

68.    K.J.Maki, L.J.Doctors, S.H.Rhee, W.M.Wilson, R.F.Beck, and A.W.Troesch, “Resistance Prediction of a High-Speed Sealift Trimaran,” 9th International Conference on Numerical Ship Hydrodynamics, Ann Arbor, MI, August 2007.

 

69.    B.Sasanapuri, V.S.Shirodkar, W.Wilson, S.Kadam, and S.H.Rhee, “Virtual Model Basin for Resistance, Maneuvering, and Seakeeping – A RANS Based Approach,” ASME Paper OMAE2007-29301, 26th International Conference on Offshore Mechanics and Arctic Engineering, San Diego, CA, June 2007.

 

70.    Y.Kim, S.H.Rhee, and S.M.Jee, “Wing-In-Ground Effects on Free Surface,” 2nd Pan Asian Association of Maritime Engineering Societies Meeting and Advanced Maritime Engineering Conference 2006, Cheju, Korea, October 2006.

 

71.    S.H.Rhee and H.Kim, “Analysis of Rudder Cavitation in Propeller Slipstream and Development of its Suppression Devices,” 2006 SNAME Maritime Technology Conference & Expo, Ft.Lauderdale, FL, October 2006.

 

72.    S.A.Kinnas, H.Lee, B.Mishra, L.He, S.H.Rhee, and B.Sasanapuri, “Hydrodynamic Analysis of Podded Propellers,” SNAME Propellers/Shafting 2006 Symposium, Virginia Beach, VA, September 2006.

 

73.    S.-E.Kim and S.H.Rhee, “Large Eddy Simulation of Turbulent Free-Surface Flows Around Surface-Piercing Bodies,” 26th Symposium on Naval Hydrodynamics, Rome, Italy, September 2006.

 

74.    K.J.Maki, A.Iafrati, S.H.Rhee, R.F.Beck, and A.W.Troesch, “The Transom-Stern Modeled as a Backward Facing Step,” 26th Symposium on Naval Hydrodynamics, Rome, Italy, September 2006.

 

75.    S.H.Rhee and B.Makarov, “Validation Study for Free-Surface Wave Flows Around Surface-Piercing Cylindrical Structures,” ASME Paper OMAE2005-67036, 24th International Conference on Offshore Mechanics and Arctic Engineering, Halkidiki, Greece, June 2005.

 

76.    S.H.Rhee and H.Kim, “Development of a High-Performance Cavitation-Free Rudder System,” ISOPE-2009-TPC-246, 19th International Offshore and Polar Engineering Conference, Seoul, Korea, June 2005.

 

77.    S.H.Rhee, “Unsteady RANS Method for Liquid Tank Sloshing,” Applied Vehicle Technology Panel (AVT) Symposium (AVT-123) on Flow Induced Unsteady Loads and the Impact on Military Applications, Budapest, Hungary, April 2005.

 

78.    S.H.Rhee and C.Skinner, “Unstructured Grid Based Navier-Stokes Solver for Free-Surface Flow around Surface Ships,” CFD Workshop Tokyo 2005, Tokyo, Japan, March 2005.

 

79.    S.-E.Kim and S.H.Rhee, “Prediction of Tip-Vortex Flow Past a Finite Wing,” AIAA Paper 2005-0058, 43rd AIAA Aerospace Sciences Meeting and Exhibit, Reno, Nevada, USA, January 2005.

 

80.    J.Yang, S.H.Rhee, J.Lee, and H.Kim, “Evaluation of the Propulsive Performance of a Tanker in Damaged Conditions,” 6th International Conference on Hydrodynamics, Perth, Australia, November 2004.

 

81.    S.H.Rhee, B.Makarov, H.Krishnan, and V.Ivanov, “Assessment of Numerical Techniques in Volume of Fluid Method for Free-Surface Wave Flows,” 9th International Symposium on Practical Design of Ships and Other Floating Structures, Hamburg, Germany, September 2004.

 

82.    S.-E.Kim and S.H.Rhee, “Toward High-Fidelity Computation of Tip-Vortex Around Lifting Surfaces – What Does It Take?,” 25th Symposium on Naval Hydrodynamics, St.John’s, Canada, August 2004.

 

83.    S.H.Rhee, “A Validation Study for Tank Sloshing Using a Navier-Stokes Solver,” ASME Paper OMAE2004-51083, 23rd International Conference on Offshore Mechanics and Arctic Engineering, Vancouver, Canada, June 2004.

 

84.    T.Watanabe, T.Kawamura, M.Maeda, and S.H.Rhee, “Simulations of Steady and Unsteady Cavitation on a Marine Propeller Using a RANS CFD code,” 5th International Symposium on Cavitation, Osaka, Japan, November 2003.

 

85.    S.H.Rhee, T.Kawamura, and H.Li, “A Study of Propeller Cavitation Using a RANS CFD Method,” 8th International Conference on Numerical Ship Hydrodynamics, Busan, Korea, September 2003.

 

86.    S.H.Rhee and S.Joshi, “CFD Validation for a Marine Propeller Using an Unstructured Mesh Based RANS Method,” ASME Paper FEDSM2003-45397, 7th International Symposium on Advances in Numerical Modeling of Aerodynamics and Hydrodynamics in Turbomachinery, 4th ASME-JSME Joint Fluids Engineering Conference, Honolulu, HI, USA, July 2003.

 

87.    S.H.Rhee and S.Joshi, “FLUENT Applications to Flow Around Marine Propellers,” 2nd MIT Conference on Computational Fluid and Solid Mechanics, Cambridge, MA, USA, June 2003.

 

88.    S.H.Rhee and E.Koutsavdis, “Unsteady Marine Propulsor Blade Flow – A CFD Validation with Unstructured Dynamic Meshing,” AIAA Paper 2003-3887, 33rd AIAA Fluid Dynamics Conference, Orlando, FL, USA, June 2003.

 

89.    H.Li, S.A.Vasquez, and S.H.Rhee, “Development and Application of a Robust Cavitation Model for Engineering Cavitating Flows,” Workshop on Cavitation and Related Research Issues, Johns Hopkins Univ., Baltimore, MD, USA, January 2003.

 

90.    S.-E.Kim, S.H.Rhee, and D.Cokljat, “Application of Modern Turbulence Models to Vortical Flow Around a 6:1 Prolate Spheroid at Incidence,” AIAA Paper 2003-0429, 41st AIAA Aerospace Sciences Meeting and Exhibit, Reno, Nevada, USA, January 2003.

 

91.    S.-E.Kim, S.H.Rhee, and D.Cokljat, “High-Incidence and Dynamic Pitch-Up Maneuvering Characteristics of a Prolate Spheroid – CFD Validation,” 24th Symposium on Naval Hydrodynamics, Fukuoka, Japan, July 2002.

 

92.    S.H.Rhee, S.-E.Kim, H.Ahn, J.Oh, and H.Kim, “Analysis of a Jet-Controlled High-Lift Hydrofoil with a Flap,” 24th Symposium on Naval Hydrodynamics, Fukuoka, Japan, July 2002.

 

93.    S.-E.Kim and S.H.Rhee, “Assessment of Eight Turbulence Models for a Three-Dimensional Boundary Layer Involving Crossflow and Streamwise Vortices,” AIAA Paper 2002-0852, 40th AIAA Aerospace Sciences Meeting and Exhibit, Reno, Nevada, USA, January 2002.

 

94.    S.H.Rhee and T.Hino, “CFD Simulation of Free-Surface Flows around Modern Cargo Ships,” RIAM Symposium on Hydrodynamic Analyses of Moving Boundaries and Ambient Fluid, Report of RIAM Symposium, No.12 ME-S2, Research Institute of Applied Mechanics, Kyushu Univ., Kyushu, Japan, March 2001.

 

95.    S.H.Rhee and T.Hino, “Numerical Simulation of 3D Turbulent Flow Separation Around a Spheroid,” 14th Computational Fluid Dynamics Symposium, Tokyo, Japan, December 2000.

 

96.    S.H.Rhee and T.Hino, “Computational Investigation of 3D Turbulent Flow Separation around a Spheroid using an Unstructured Grid Method,” Fall Meeting of Society of naval Architects of Japan, Osaka, Japan, November 2000.

 

97.    S.H.Rhee, T.Hino, N.Hirata, Y.Kodama, K.Kume, H.Takeshi, and Y.Ukon, “Concurrent and Complementary Experimental and Computational Investigations for Hydrodynamic Design System of a Surface Ship,” International Mechanical Engineering Congress and Exposition, Forum on Integrated Experimental and Simulation Investigations in Research and Design, Orlando, Florida, USA, November 2000.

 

98.    S.H.Rhee and T.Hino, “Unstructured Grid Flow Solver for Practical Ship Hulls,” Gothenburg 2000 Workshop on CFD in Ship Hydrodynamics, Gothenburg, Sweden, September 2000.

 

99.    S.H.Rhee and T.Hino, “Unstructured Grid Flow Solver for Ship Flows,” 4th International Conference on Hydrodynamics, Yokohama, Japan, September 2000.

 

100.    S.H.Rhee and T.Hino, “Free-surface Flow Analysis around a Ship Hull using an Unstructured Grid Flow Solver,” 11th Computational Fluid Mechanics Symposium, Kyoto, Japan, July 2000.

 

101.    S.H.Rhee and T.Hino, “Uncertainty Assessment of RANS CFD Simulations using an Unstructured Grid Method,” 13th Computational Fluid Dynamics Symposium, Tokyo, Japan, December 1999.

 

102.    S.H.Rhee and F.Stern, “Numerical Modeling of the Trailing Wake of a Breaking Wave,” ONR Workshop on Free-Surface Turbulence and Bubbly Flows, La Jolla, CA, February 1999.

 

103.    J.Longo, S.H.Rhee, D.Kuhl, B.Metcalf, R.Rose, and F.Stern, “IIHR Towing-Tank Wavemaker,” 25th American Towing Tank Conference, Iowa City, Iowa, September 1998.

 

104.    S.H.Rhee and F.Stern, “Unsteady RANS Method for Surface Ship Boundary Layer and Wake and Wave Field,” 3rd Osaka Colloquium on Advanced CFD Applications to Ship Flow and Hull Form Design, Osaka, Japan, May 1998.

 

105.    S.H.Rhee, “Boundary Layer and Wake of a Surface-Piercing Body with Ambient Waves,” KSEA 6th Midwest Regional Conference, Korean-American Scientists and Engineers Association, Midwest Chapter, Iowa City, IA, June 1996.

 

106.    S.H.Rhee, S.S.Rhyu, and H.Kim, “A Study on Stern Form Modification of Full Ship,” Hull Form 92 Workshop, Inha University, Incheon, Korea, June 1992.

 

107.    J.H.Yoo, S.S.Rhyu, S.H.Rhee, and H.Kim, “Some Extension of Series 60 Data for Full Ship,” 1st Korea-Japan Workshop on Hydrodynamics in Ship Design, Seoul, Korea, June 1991.


Domestic Conferences

 

1.       W.Seok, M.Kumar, G.W.Nam, S.J.Oh, J.Seo, A.Samad, and S.H.Rhee, “SNUFOAM을 이용한 수평축 조류발전 터빈의 단면 형상 최적화 (Section Shape Optimization of a Horizontal Axis Tidal Stream Turbine Using SNUFOAM),” Annual Spring Meeting of the Korean Society for Computational Fluids Engineering, Gyeongju, Korea, May 2017 (In Korean).

 

2.       J.Ha, J.Seo, H.Jeong, S.H.Rhee, H. K. Yoon, K-P.Rhee, “손상함정의 조종 성능 평가를 위한 3자유도 운동모델과 구속모형시험 시스템의 개발 (Development of 3DOF Dynamic Model and Captive Model Test System to Evaluate Damaged Ship Maneuverability),” Annual Spring Meeting of the Society of Naval Architects of Korea, Busan, Korea, April 2017 (In Korean).

 

3.       M.Kumar, G.W.Nam, S.J.Oh, J.Seo, A.Samad, and S.H.Rhee, “조류발전 터빈의 날개 형상 최적화를 위한 CFD의 활용 (CFD Utilization for Shape Optimization of Tidal Stream Turbine Blades),” Annual Spring Meeting of the Korean Society for Marine Environment and Energy, Busan, Korea, April 2017 (In Korean).

 

4.       J.Seo, J. Kim, J.H.Ko, and S.H.Rhee, “조류-양수 융합발전시스템의 유동 가시화에 대한 초기 연구 (A Preliminary Study of Flow Visualization in the Tidal Current-Pumped Storage Hybrid Power Generation),” Annual Spring Meeting of the Korean Society for Marine Environment and Energy, Busan, Korea, April 2017 (In Korean).

 

5.       S.C. Park, Y.M. Choi, H.K. Choi and S.H.Rhee, “SNUFOAM을 이용한 저속비대선용 반원형 덕트 에너지 저감장치의 변수연구 (A Parametric Study of Energy Saving Device for KVLCC2 Using SNUFOAM : Semi-circular Duct),” Annual Autumn Meeting of the Korean Society for Computational Fluids Engineering, Yeosu , Korea, May 2016 (In Korean).

 

6.       D.J. Jang, Y.M. Choi, H.K. Choi and S.H.Rhee, “SNUFOAM을 이용한 2차원 선박단면 형상의 입수 충격에 대한 연구 (A Study on Water Entry of Two-dimensional Cross-sectional Shape Using SNUFOAM),” Annual Autumn Meeting of the Korean Society for Computational Fluids Engineering, Yeosu , Korea, May 2016 (In Korean).

 

7.       H.B.Lee, H.K.Choi, and S.H.Rhee, “격자변형 기법을 이용한 6자유도 운동의 해석 (6DOF motion analysis by mesh deformation,” Annual Spring Meeting of the Society of Naval Architects of Korea, Busan, Korea, May 2016 (In Korean).

 

8.       M.P.Espinoza, J.Seo, and S.H.Rhee, “URANS 기법을 통한 선수/선미파 조건의 손상 선박의 파랑 중 운동응답과 침수 유동 해석 (Motion Response and Flooding Behavior Analysis of a Damaged Ship in Head/following Seas Using URANS Method),” Annual Spring Meeting of the Society of Naval Architects of Korea, Busan, Korea, May 2016.

 

9.       G.Kim, H.Shin, J.Seo, H.K.Choi, and S.H.Rhee, “실험계획법을 CFD에 적용한 부가저항 감소 목적의 최적 선수형상 연구 (Bow Design Parameter Optimization for Added Resistance Reduction by Applying the Design of Experiments Method to CFD),” Annual Spring Meeting of the Society of Naval Architects of Korea, Busan, Korea, May 2016 (In Korean).

 

10.    K.Park, D.Kim, S.Y.Kim, H.B.Lee, and S.H.Rhee, “CFD에 의한 고속 활주선의 유체 성능 해석 (The Hydrodynamic Performance Analysis of Planing Hull by CFD),” Annual Spring Meeting of the Society of Naval Architects of Korea, Busan, Korea, May 2016 (In Korean).

 

11.    D.Kim, S.Y.Kim, J.Seo, and S.H.Rhee, “무인선 선형개발을 위한 유체성능시험 (USV Model Tests for the Assessment of Its Manoeuvring and Seakeeping Performance),” Annual Spring Meeting of the Society of Naval Architects of Korea, Busan, Korea, May 2016 (In Korean).

 

12.    B.Han, J.Seo, and S.H.Rhee, “PBCF의 설계 요목 변경이 추진기 단독/자항 상태의 후류와 연료 절감 효과에 미치는 영향 (Effects of PBCF Design Parameter Variations on Wake Fields and Energy Saving Performance in Open Water/Self Propulsion Condition),” Annual Spring Meeting of the Society of Naval Architects of Korea, Busan, Korea, May 2016 (In Korean).

 

13.    J.Seo, C.Santiago, J.Ha, and S.H.Rhee, “직진 안정성 평가를 위한 손상 선박의 파랑 중 자유항주 시험 (Free-Running Model Tests of a Damaged Ship for Course-Keeping Ability in Waves),” Annual Spring Meeting of the Society of Naval Architects of Korea, Busan, Korea, May 2016 (In Korean).

 

14.   H.K.Choi, H.B.Lee, and S.H.Rhee, “오픈소스 라이브러리를 이용한 격자 중첩 기법의 수중익 주위 공동현상 해석 적용 (Application of Overlap Grid Technique Using a Opne-Source Library for Analysis of Cavitating Flow Around a Hydrofoil),” Annual Autumn Meeting of the Korean Society for Computational Fluids Engineering, Hanyang University ERICA campus, Korea, October 2015 (In Korean).

 

15.    H.B.Lee, J.H.Gill, G.H.Oh, and S.H.Rhee, “수정된 오픈폼 기본 해석자를 활용한 FPSO의 조류 하중 해석 (A Tidal load Analysis of FPSO Using Modified OpenFOAM Standard Solver),” Annual Autumn Meeting of the Korean Society for Computational Fluids Engineering, Hanyang University ERICA campus, Korea, October 2015 (In Korean).

 

16.    M.P.Espinoza and S.H.Rhee, “선수파 중 자항상태 여객선에 대한 중첩 격자 기법의 적용 (Application of a Dynamic Overset Grid Method for a Self-Propelling Cruise Ship in Head Seas),” Annual Autumn Meeting of the Korean Society for Computational Fluids Engineering, Hanyang University ERICA campus, Korea, October 2015.

 

17.    J.Seo, S.T.Park, and S.H.Rhee, “예인수조용 SPIV 시스템을 이용한 수평축 조류발전 터빈의 3차원 후류 유동구조 연구 (Study on Three-Dimensional Wake Structure of a Horizontal Axis Tidal Stream Turbine Using Towed Underwater SPIV System),” Annual Spring Meeting of the Korean Society for New and Renewable Energy, Busan, Korea, June 2015 (In Korean).

 

18.    J.Seo, H.K.Choi, and S.H.Rhee, “파인성 박리현상을 수반한 수면 관통물체 주위 유동에 대한 Reynolds 수의 영향 (Reynolds Number Effects on the Flow Field around a Surface Piercing Body with Wave-Induced Separation),” Annual Spring Meeting of the Society of Naval Architects of Korea, Jeju, Korea, May 2015 (In Korean).

 

19.    J.Seo, W.Y.Lee, C.Santiago, and S.H.Rhee, “오토 파일럿 시스템을 이용한 모형선의 파랑 중 6자유도 운동 응답 계측 시스템 (An Experimental System for Measuring 6DoF Motion Response of a Model Ship in Waves),” Annual Spring Meeting of the Society of Naval Architects of Korea, Jeju, Korea, May 2015 (In Korean).

 

20.    J.Seo, S.T.Park, and S.H.Rhee, “다양한 TSR 조건에서의 수평축 조류발전 터빈 모형의 후류 유동장 계측 (Wake Field Measurement of a Horizontal Axis Tidal Stream Turbine in Various TSR Conditions),” Annual Spring Meeting of the Korean Society for Marine Environment and Energy, Jeju, Korea, May 2015 (In Korean).

 

21.    S.Park, G.Oh, J.Yang, and S.H.Rhee, “전산유체역학을 이용한 설계인자 변화에 따른 배기가스 흐름 해석 및 설계안 도출 (Exhaust-Gas Flow Analysis for Design Parameters Using Computational Fluid Dynamics and Suggestion for Design Guideline),” Annual Spring Meeting of the Korean Society for Computational Fluids Engineering, Jeju, Korea, May 2015 (In Korean).

 

22.    S.H.Ko, H.B.Lee, H.K.Choi, and S.H.Rhee, “아이스하버식 어도 내 수리특성에 관한 수치해석연구 (Numerical Analysis of the Hydraulic Characteristics of Ice-Harbor Type Fishway),” Annual Spring Meeting of the Korean Society for Computational Fluids Engineering, Jeju, Korea, May 2015 (In Korean).

 

23.    D.A.Park, H.B.Lee, H.K.Choi, and S.H.Rhee, “전산유체역학을 이용한 스프링클러 헤드의 형상 개선에 대한 연구 (A Study on Improvement of Sprinkler Head Design Using Computational Fluid Dynamics),” Annual Spring Meeting of the Korean Society for Computational Fluids Engineering, Jeju, Korea, May 2015 (In Korean).

 

24.    S.K.Yoo, S.H.Rhee, J.W.Kim, H.M.Kim, T.G.Kim, and Y.J.Jeon, “ 다구치 방법론을 이용한 부유쓰레기 처리 로봇 흡입 부분 형상 최적화 (The Optimal Design of Entrance Shape of Cleaning Robot for Floating Pollutant Using ‘Taguchi Method’),” Annual Spring Meeting of the Korean Society for Computational Fluids Engineering, Jeju, Korea, May 2015 (In Korean).

 

25.    J.W.Shin, H.B.Lee, and S.H.Rhee, “모형시험을 이용한 거북선의 저항성능 및 조종성능 추정 (A Study of Resistance and Maneuvering Performance of the Geobukseon Using Experimental Fluid Dynamics),” Annual Autumn Meeting of the Korean Society of Mechanical Engineers, Jeju, Korea, November 2014 (In Korean).

 

26.    J.Seo, C.W.Park, and S.H.Rhee, “초대형 케이슨의 예인 안정성 평가를 위한 모형시험 시스템 개발 (Model Test System for Towing Stability of a Very Large Caisson),” Annual Autumn Meeting of the Korean Society for Marine Environment and Energy, Seoul, Korea, November 2014 (In Korean).

 

27.    S.Park and S.H.Rhee, “초공동 캐비테이터의 전산유체역학 해석을 위한 코드 개발 및 적용,” Annual Autumn Meeting of the Society of Naval Architects of Korea, Changwon, Korea, November 2014 (In Korean).

 

28.    H.B.Lee, S.H.Rhee, H.K.Choi, and C.M.Jung, “수치기법을 이용한 고속함정의 저항 및 자세 추정,” Annual Autumn Meeting of the Society of Naval Architects of Korea, Changwon, Korea, November 2014 (In Korean).

 

29.    J.Seo, S.T.Park, S.H.Rhee, T.G.Lim, and B.W.Han, “예인수조용 SPIV를 이용한 자항 상태 모형선의 프로펠러 유입류 계측 (Measurement of Propeller Inflow of a Model Ship in Self-propulsion Condition Using Towed Underwater SPIV),” Annual Autumn Meeting of the Society of Naval Architects of Korea, Changwon, Korea, November 2014 (In Korean).

 

30.    S.T.Park, J.Seo, and S.H.Rhee, “SPIV를 이용한 조류발전 터빈의 후류유동 계측 및 상호상관면 중첩법을 이용한 SPIV 해석 알고리즘 개발 (SPIV Measurement of Wake Flow in Current Turbine & Development of SPIV Algorithm Using Reiterated Method of Cross Correlation Plane),” Annual Autumn Meeting of the Society of Naval Architects of Korea, Changwon, Korea, November 2014 (In Korean).

 

31.    H.B.Lee, S.H.Park, D.J.Kim, S.Y.Kim, and S.H.Rhee, “자유수면 경계에서의 해의 번짐을 줄이기 위한 경계면 압축 기법 및 주상체의 적용 (Dynamic Interface Compression Method for Reducing Numerical Interface Smearing on Free-surface and Its Application to Prismatic Body),” Annual Spring Meeting of the Korean Society for Computational Fluids Engineering, Jeju, Korea, May 2014 (In Korean).

 

32.    C.Santiago, J.Seo, T.G.Lim, and S.H.Rhee, “선수파 중 손상 선박의 6자유도 운동 특성에 대한 실험적 연구 (An Experimental Study on the 6DOF Motion Responses of a Damaged Ship in Head Seas),” Annual Spring Meeting of the Society of Naval Architects of Korea, Busan, Korea, May 2014.

 

33.    J.Seo, S.T.Park, T.G.Lim, B.W.Han, and S.H.Rhee, “예인수조용 스테레오스코픽 입자영상유속계 시스템의 불확실성 해석 (Uncertainty Assessment of a Towed Underwater Stereoscopic PIV System),” Annual Spring Meeting of the Society of Naval Architects of Korea, Busan, Korea, May 2014 (In Korean).

 

34.    J.Seo, D.J.Kim, S.Y.Kim, and S.H.Rhee, “무인선 개선선형의 유체성능과 부가물 효과 검증을 위한 고속예인시험 (High-speed Model Tests of Unmanned Vessel with Variation of Hull Forms and Stern Appendages),” Annual Spring Meeting of the Society of Naval Architects of Korea, Busan, Korea, May 2014 (In Korean).

 

35.    M.Y.Park, H.Lee, and S.H.Rhee, “풍상 범주 중인 세일링 요트의 자세 및 속도 추정을 위한 기초 유동 해석 (Fundamental Flow Analysis for Velocity Prediction of a Yacht Sailing Upwind),” Annual Autumn Meeting of the Korean Society for Computational Fluids Engineering, Seoul, Korea, November 2013 (In Korean).

 

36.    H.Lee and S.H.Rhee, “정수 중 활주하는 고속정의 저항성능 및 자세추정을 위한 수치해석 기법 (Numerical Method for Motions and Resistance of a Planing Hull in Calm Water),” Annual Autumn Meeting of the Korean Society for Computational Fluids Engineering, Seoul, Korea, November 2013 (In Korean).

 

37.    S.T.Park, J.H.Seo, T.Lim, B.W.Han, D.H.Kim, and S.H.Rhee, “3차원 입자영상유속계와 포텐셜반류를 이용한 실선반류분포 추정 (Prediction of Full-Scale Nominal Wake Using Sasajima-Tanaka Method with SPIV Results in Towing Tank),” Annual Spring Meeting of the Society of Naval Architects of Korea, Jeju, Korea, May 2013 (In Korean).

 

38.    M.Y.Park, H.B.Lee, and S.H.Rhee, “변형을 고려한 3차원 요트세일 주위의 유동특성에 대한 수치적 해석,” Annual Spring Meeting of the Society of Naval Architects of Korea, Jeju, Korea, May 2013 (In Korean).

 

39.    H.B.Lee, D.H.Kim, and S.H.Rhee, “전산유체역학을 이용한 무인선 기본선형의 저항성능 추정 및 유동해석,” Annual Spring Meeting of the Society of Naval Architects of Korea, Jeju, Korea, May 2013 (In Korean).

 

40.    J.H.Seo, T.Lim, S.T.Park, S.H.Rhee, D.J.Kim, and S.Y.Kim, “모형시험을 이용한 무인선 기본선형의 저항 및 운동성능 평가 (Resistance and Seakeeping test of Unmanned Vessel by Model Test),” Annual Spring Meeting of the Society of Naval Architects of Korea, Jeju, Korea, May 2013 (In Korean).

 

41.    S.Park and S.H.Rhee, “캐비테이션 침식 추정을 위한 실용적인 방법 개발 (Development of Practical Formula for Prediction of Cavitation Erosion),” Annual Spring Meeting of the Society of Naval Architects of Korea, Jeju, Korea, May 2013 (In Korean).

 

42.    S.W.Park, S.Park, and S.H.Rhee, “수평축 조류발전 터빈의 비 설계 조건을 고려한 수치 해석 기법 개발 (Development of Numerical Analysis Method for Horizontal Axis Tidal Stream Turbine with Considering Off-design Condition),” Annual Spring Meeting of the Korean Society for Computational Fluids Engineering, Jeju, Korea, May 2013 (In Korean).

 

43.    J.H.Seo and S.H.Rhee, “학부 교육을 위한 예인수조시설의 이용 (Application of Towing Tank Facility for Undergraduate Education),” Conference of Korean Society for Engineering Education, Goyang, Korea, November 2012 (In Korean).

 

44.    D.M.Seol, J.H.Seo, T.Lim, S.T.Park, H.Kim, S.H.Rhee, and S.G.Kim, “50노트급 고속정 선형개발 및 모형시험을 통한 마력계산방법 연구 (Study on the Hull Form Development and Effective Horsepower Estimation for a 50knot Class High-speed Vessel),” 2012 Naval Ship Technology Seminar, Changwon, Korea, November 2012 (In Korean).

 

45.    S.Park, S.W.Park, and S.H.Rhee, “자유수면 유동 해석에서 해의 번짐 방지를 위한 소스항의 영향 연구 (Studies on the Influence of a Source Term in the Volume Fraction Transport Equation to Reduce a Numerical Diffusion for Free-surface Wave Flows Analysis),” Annual Autumn Meeting of the Korean Society for Computational Fluids Engineering, Busan, Korea, November 2012 (In Korean).

 

46.    S.W.Park, S.Park, and S.H.Rhee, “사류 조건을 고려한 수평축 조류발전터빈의 성능해석 (Performance Analysis of Horizontal Axis Tidal Stream Turbine placed in Inclined Inflow),” Annual Autumn Meeting of the Korean Society for Marine Environmental Engineering, Goseong, Korea, November 2012 (In Korean).

 

47.    D.H.Kim, S.K.Lee, S.H.Rhee, and K.-P.Rhee, “손상상태 선박의 안정성에 관한 수치적, 실험적 연구 (Numerical and Experimental Study of Damaged Ship Stability),” National Congress on Fluids Engineering, Gyeongju, Korea, August 2012 (In Korean).

 

48.    D.M.Seol, J.H.Seo, and S.H.Rhee, “예인수조용 입자영상유속계를 이용한 수면 관통물체 주위의 난류운동에 대한 자유수면 영향 조사 (Free-Surface Wave Effect on the Turbulent Flow around a Surface-Piercing Using Towed Underwater PIV),” Annual Spring Meeting of the Society of Naval Architects of Korea, Daegu, Korea, May 2012 (In Korean).

 

49.    S.W.Park, S.Park, S.H.Rhee, and B.-S.Hyun, “수평축 조류발전 터빈의 지지구조물 간섭 효과와 유입류 조건을 고려한 성능해석 (Performance Analysis for Horizontal Axis Tidal Stream Turbine Considering the Effect of Interaction with Supporting Structure and Inflow Condition),”Annual Spring Meeting of the Korean Society for Marine Environmental Engineering, Daegu, Korea, May 2012 (In Korean).

 

50.    S.Park and S.H.Rhee, “캐비테이션 침식 추정을 위한 실용적인 기법 개발 (Development of Practical Formula for Prediction of Cavitation Erosion),” Annual Spring Meeting of the Korean Society for Computational Fluids Engineering, Jeju, Korea, May 2012 (In Korean).

 

51.    H.B.Lee and S.H.Rhee, “자유수면 유동 해석을 위한 경계면 포착 기법들에 대한 비교 연구 (Numerical Comparative Study of Sharp Interface Capturing Schemes for Free-Surface Flow Analysis),” Annual Spring Meeting of the Korean Society for Computational Fluids Engineering, Jeju, Korea, May 2012 (In Korean).

 

52.    J.M.You, S.W.Park, and S.H.Rhee, “전산유체역학 검증을 위한 쐐기 형상 후류 중의 유연평판 거동에 대한 실험적 연구 (Experimental Study on Behavior of a Flexible Plate in Wedge Cylinder for CFD Validation),” Fluid Machinery Research and Development Conference, Korean Fluid Machinery Association, Gyeongju, Korea, December 2011 (In Korean).

 

53.    S.Park, S.W.Park, S.H.Rhee, S.B.Lee, J.E.Choi, and S.H.Kang, “OpenFOAM 라이브러리를 이용한 선박 저항계산 프로그램 개발 (Program Development for the Prediction of the Ship Resistance Using OpenFOAM Libraries),” Annual Autumn Meeting of the Korean Society of Computational Fluids Engineering, Daegu, Korea, November 2011 (In Korean).

 

54.    S.Park and S.H.Rhee, “OpenFOAM 라이브러리의 조선 및 해양 산업에의 적용,” Annual Autumn Meeting of the Society of Naval Architects of Korea, Mokpo, Korea, November 2011 (In Korean).

 

55.    J.H.Seo, D.M.Seol, S.H.Rhee, J.O.Kwon, S.H.Choi, and S.M.Ahn, “예인수조용 입자영상유속계를 이용한 저속비대선의 선미 유동장 계측,” Annual Autumn Meeting of the Society of Naval Architects of Korea, Mokpo, Korea, November 2011 (In Korean).

 

56.    J.S.Han, D.H.Lee, B.-S.Hyun, M.-C.Kim, S.H.Rhee, and M.Song, “조류발전용 수직축 터빈의 3차원 효과에 대한 고찰 (Study on Tidal Stream Vertical Axis Turbine with Three-Dimensional Effect),” Annual Autumn Meeting of the Korea Society of Marine Environmental Engineering, Busan, Korea, November 2011 (In Korean).

 

57.    I.-R.Do, M.-C.Kim, B.-S.Hyun, and S.H.Rhee, “1MW급 조류발전 터빈의 설계와 해석 (Design and Performance Analysis of 1 MW Class Horizontal Axis Tidal Stream Turbine),” Annual Autumn Meeting of the Korea Society of Marine Environmental Engineering, Busan, Korea, November 2011 (In Korean).

 

58.    S.W.Park, S.Park, and S.H.Rhee, “이중 다류관 모델을 이용한 수직축 조류발전터빈의 성능 해석 프로그램 개발 (Development of a Performance Prediction Tool for Vertical Axis Tidal Stream Turbines Based on Double-Multiple Streamtube Model),” Annual Autumn Meeting of the Korea Society of Marine Environmental Engineering, Busan, Korea, November 2011 (In Korean).

 

59.    S.W.Park, J.-M.You, and S.H.Rhee, “CFD 검증용 데이터베이스 구축을 위한 유연평판의 유체-구조 연성 거동에 대한 실험적 연구 (Experimental Study on Fluid-Struecture Interaction of a Flexible Plate for CFD Validation Database),” Annual Autumn Meeting of the Korea Society of Marine Environmental Engineering, Busan, Korea, November 2011 (In Korean).

 

60.    M.Song, B.-S.Hyun, and S.H.Rhee, “수직축 조류터빈의 설계인자와 효율에 대한 유동학적 고찰 (A Simplified Model Study on the Performance of the Tidal Current Vertical Axis Turbine),” Annual Autumn Meeting of the Korea Society of Marine Environmental Engineering, Busan, Korea, November 2011 (In Korean).

 

61.    S.Park, D.H.Kim, J.H.Seo, and S.H.Rhee, “추진기 날개끝 형상에 따른 보오텍스 특성에 대한 수치해석,” Annual Spring Meeting of the Society of Naval Architects of Korea, Busan, Korea, June 2011 (In Korean).

 

62.    D.H.Kim, J.H.Lee, S.W.Park, and S.H.Rhee, “날개 요소 운동량 이론 방법을 이용한 조류발전터빈 성능해석 (Performance Analysis of the Marine Current Turbine using Blade Element Momentum Theory),” Annual Spring Meeting of the Korea Society of Marine Environmental Engineering, Busan, Korea, June 2011 (In Korean).

 

63.    S.W.Park, J.H.Lee, D.H.Kim, H.B.Lee, S.Park, and S.H.Rhee, “수치해법을 이용한 풍력 및 조류 발전용 수평축 터빈 성능 해석 (Numerical Analysis for Horizontal Axis Wind and Tidal Stream Energy Conversion Turbine),” Annual Spring Meeting of the Korean Society for New and Renewable Energy, Kyungju, Korea, May 2011 (In Korean).

 

64.    H.B.Lee and S.H.Rhee, “유체-구조 연성 기법을 사용한 움직이는 2차원 실린더 주위의 유동해석 (Fluid-structure Interaction Analysis of Two-dimensional Flow around a Moving Cylinder),” Annual Spring Meeting of the Korean Society of Computational Fluids Engineering, Jeju, Korea, May 2011 (In Korean).

 

65.    S.Park and S.H.Rhee, “3차원 비틀어진 날개 주위의 비정상 공동 현상에 대한 수치해석 (Numerical Analysis of Unsteady Cavitating Flow on a Three-dimensional Twisted Hydrofoil),” Annual Spring Meeting of the Korean Society of Computational Fluids Engineering, Jeju, Korea, May 2011 (In Korean).

 

66.    J.H.Seo, D.M.Seol, and S.H.Rhee, “예인수조용 입자영상유속계를 이용한 수면 관통 물체 주위 유동장의 자유수면 영향 조사 (Free-surface Wave Effects on the Flow Field around a Surface-piercing body using Towed Underwater PIV),” Annual Spring Meeting of the Korean Society of Mechanical Engineers, Pohang, Korea, April 2011 (In Korean).

 

67.    S.Park and S.H.Rhee, “2차원 및 축대칭 운동체 주위의 초공동 현상에 대한 수치해석 (Numerical Analysis of Super-cavitating Flow around Two-dimensional and Axisymmetric Bodies),” Annual Autumn Meeting of the Korean Society of Computational Fluids Engineering, Pohang, Korea, November 2010 (In Korean).

 

68.    J.S.Han, D.H.Choi, B.S.Hyun, M.C.Kim, and S.H.Rhee, “3차원 효과를 고려한 조류발전용 수직축 터빈 해석 (3-D Effect of Vertical Axis Tidal Stream Turbine Analysis),” Annual Autumn Meeting of the Korea Society of Marine Environmental Engineering, Daejeon, Korea, November 2010 (In Korean).

 

69.    M.Song, J.I.Ahn, M.J.Kang, B.S.Hyun, M.C.Kim, and S.H.Rhee, “조류발전의 요소/특허기술 고찰 (About a few Key Technologies on Tidal Stream Power Generation),” Annual Autumn Meeting of the Korea Society of Marine Environmental Engineering, Daejeon, Korea, November 2010 (In Korean).

 

70.    I.R.Do, M.C.Kim, B.C.Shin, S.H.Rhee, B.S.Hyun, and M.Song, “예인수조를 이용한 조류 속도 변화에 따른 조류발전 터빈의 동력 계측 연구 (Study on Power Measurement of Marine Current Turbine in Various Current Speed in a Towing Tank),” Annual Autumn Meeting of the Korea Society of Marine Environmental Engineering, Daejeon, Korea, November 2010 (In Korean).

 

71.    J.H.Lee, D.H.Kim, S.H.Rhee, M.C.Kim, and B.S.Hyun, “조류발전용 수평축 터빈의 수치해석 (Computational Analysis of Horizontal Axis Tidal Stream Turbine Designs),” Annual Autumn Meeting of the Korea Society of Marine Environmental Engineering, Daejeon, Korea, November 2010 (In Korean).

 

72.    B.S.Hyun, M.C.Kim, and S.H.Rhee, “조류발전용 터빈 설계용 표준화 S/W 개발 (Development of Standardized S/W for Tidal Stream Turbine Design),” Annual Autumn Meeting of the Korea Society of Marine Environmental Engineering, Daejeon, Korea, November 2010 (In Korean).

 

73.    D.M.Seol, J.H.Seo, and S.H.Rhee, “예인수조용 PIV 설치 성능 검증(Installation of the Towed Underwater PIV System and Performance Verification),” Annual Autumn Meeting of the Society of Naval Architects of Korea, Changwon, Korea, October 2010 (In Korean).

 

74.    S.H.Cho, H.B.Lee, and S.H.Rhee, “수치계산을 이용한 3차원 타의 틈새유동 및 캐비테이션 해석,” Annual Spring Meeting of the Society of Naval Architects of Korea, Jeju, Korea, June 2010 (In Korean).

 

75.    S.Park and S.H.Rhee, “전산유체역학을 위한 공동 모델의 특성 조사 (Investigation for the Characteristics of Cavitation Modeling for Computational Fluid Dynamics),” Annual Spring Meeting of the Society of Naval Architects of Korea, Jeju, Korea, June 2010 (In Korean).

 

76.    D.M.Seol, J.H.Lee, S.H.Rhee, H.R.Chi, D.S.Jun, and M.C.Ryu, “크루저 선형 변화에 따른 저항성능에 대한 실험적 연구 (Experimental Study of Resistance Performance Based on Changes in the Hull Form of Cruise Ship),” Annual Spring Meeting of the Society of Naval Architects of Korea, Jeju, Korea, June 2010 (In Korean).

 

77.    D.H.Choi, J.S.Han, B.S.Hyun, J.H.Nam, M.C.Kim, and S.H.Rhee, “다리우스형 조류발전 터빈의 실험적 성능해석 (Experimental Performance Analysis of Darrieus Type Tidal Stream Turbine),” Annual Spring Meeting of the Korea Society of Marine Environmental Engineering, Jeju, Korea, June 2010 (In Korean).

 

78.    J.H.Nam, S.H.Rhee, B.S.Hyun, and M.C.Kim, “An Approach to Construction of Performance Index of Tidal Stream Turbine,” Annual Spring Meeting of the Korea Society of Marine Environmental Engineering, Jeju, Korea, June 2010 (In Korean).

 

79.    B.C.Shin, M.C.Kim, S.H.Rhee, J.H.Lee, B.S.Hyun, and J.H.Nam, “저소음 고효율 조류발전용 친환경 HAT 임펠러 연구 (Study on Low Noise and High Efficiency HAT Impeller for Tidal Stream Power),” Annual Spring Meeting of the Korea Society of Marine Environmental Engineering, Jeju, Korea, June 2010 (In Korean).

 

80.    J.H.Lee, D.H.Kim, and S.H.Rhee, “조류발전용 수평축 터빈의 단독성능 평가를 위한 수치 해석법 (Numerical Methods for Open Water Performance Prediction of Horizontal Axis Tidal Stream Energy Conversion Turbine),” Annual Spring Meeting of the Korean Society of Computational Fluids Engineering, Jeju, Korea, May 2010 (In Korean).

 

81.    H.B.Lee and S.H.Rhee, “격자 변형 기법을 사용한 운동하는 2차원 실린더 주위의 유동 해석 (Analysis of Two-Dimensional Flow Around an Oscillating Cylinder Using Moving Mesh Techniques),” Annual Spring Meeting of the Korean Society of Computational Fluids Engineering, Jeju, Korea, May 2010 (In Korean).

 

82.    M.C.Kim, B.C.Shin, S.H.Lee, S.H.Rhee, J.H.Lee, B.S.Hyun, and J.H.Nam, “HAT 임펠러 설계의 개선 방향에 대하여 (Study for the Improvement Direction of HAT Impeller Design),” Annual Autumn Meeting of the Korean Society for Marine Environmental Engineering, Yeosoo, Korea, November 2009 (In Korean).

 

83.    J.H.Lee and S.H.Rhee, “매크로 기능을 이용한 선박 격자의 자동 생성 기법 (Automatic Mesh Generation Around Ship Hull Using the Macro),” Annual Autumn Meeting of the Korean Society of Computational Fluids Engineering, Daejeon, Korea, November 2009 (In Korean).

 

84.    B.J.Park and S.H.Rhee, “Hybrid Mesh 및 Sliding Mesh를 이용한 선박 저항추진 성능 시험 (Ship Resistance and Propulsion Performance Test Using Hybrid Mesh and Sliding Mesh),” Annual Autumn Meeting of the Korean Society of Computational Fluids Engineering, Daejeon, Korea, November 2009 (In Korean).

 

85.    D.M.Seol, J.H.Lee, C.M.Lee, S.H.Rhee, H.R.Chi, and D.S.Jun, “POD 추진 크루즈선의 저항성능에 관한 실험적 연구 (An Experimental Study of Resistance Performance of a POD Driven Cruiser),” Annual Autumn Meeting of the Society of Naval Architects of Korea, Mungyeong, Korea, November 2009 (In Korean).

 

86.    H.H.Lee, H.J.Lim, and S.H.Rhee, “FPSO의 선수부 갑판 형상 변화에 따른 갑판 침입수 현상에 대한 실험적 고찰 (Experimental Investigation of the Bow Configuration Influence on the Green Water on FPSO),” Annual Spring Meeting of the Korean Society of Ocean Engineers, Changwon, Korea, May 2009 (In Korean).

 

87.    K.H.Shin, H.S.Jang, J.-C.Suh, S.H.Rhee, S.H.Lee, J.-K.Oh, and H.Kim, “PIV 기법을 이용한 혼-타의 간극유동에 대한 가시화 연구 (Study on flow visualization about the gap flow of semi-spade rudders using PIV technique),” Annual Autumn Meeting of the Society of Naval Architects of Korea, Changwon, Korea, November 2008 (In Korean).

 

88.    J.-K.Oh, C.M.Lee, D.S.Koh, H.B.Lee, J.-C.Suh, and S.H.Rhee, “캐비테이션 초생 관측실험 및 압력계측 실험을 통한 타의 유동차단장치에 대한 검증,” Annual Autumn Meeting of the Society of Naval Architects of Korea, Changwon, Korea, November 2008 (In Korean).

 

89.    H.B.Lee, B.J.Park, S.H.Rhee, J.H.Bae, K.W.Lee, W.J.Jeong, and S.J.An, “극저온 유체 화물창 방벽 내의 액체유동 및 기화 시뮬레이션 (Liquid Flow and Evaporation Simulation of Cryogenic Fluid in the Wall of Cryogenic Fluid Cargo Containment System),” Annual Autumn Meeting of the Korea Society of Computational Fluids Engineering, Seoul, Korea, October 2008.

 

90.    H.B.Lee, S.H.Rhee, and J.-K.Oh, “수치 계산을 이용한 타의 틈새 유동해석 및 캐비테이션 초생조건 추정 (Rudder Gap Flow Analysis and Cavitation Inception Prediction using Computational Method),” Annual Spring Meeting of the Society of Naval Architects of Korea, Jeju, Korea, May 2008 (In Korean).

 

91.    J.-K.Oh, D.Seo, C.Lee, D.Koh, S.-H.Lee, S.H.Rhee, J.-C.Suh, and H.Kim, “타의 틈새유동 차단에 의한 캐비테이션 감소 및 압력 변화에 관한 실험적 연구 (Experimental Study on the Cavitation Suppression and Pressure Variation due to the Rudder Gap Flow Blocking Devices),” Annual Spring Meeting of the Society of Naval Architects of Korea, Jeju, Korea, May 2008 (In Korean).

 

92.    J.-K.Oh, D.Seo, S.H.Rhee, S.-H.Lee, and H.Kim, “타의 틈새유동 차단장치 개발 및 실험적 검증 (Development of Rudder Gap Flow Blocking Devices and its Concept Verification through Experimental Studies),” Annual Autumn Meeting of the Society of Naval Architects of Korea, Jeju, Korea, November 2007 (In Korean).

 

93.    S.H.Rhee, J.K.Oh, J.C.Suh, J.M.Lew, and H.Kim, “틈새유동차단장치를 이용한 타 캐비테이션의 회피방안 (Application of Gap Flow Control Devices to Avoid the Rudder Cavitation),” Annual Spring Meeting of the Society of Naval Architects of Korea, Busan, Korea, May 2006 (In Korean).

 

94.    J.Yang, H.Kim, and S.H.Rhee, “Evaluation of the Propulsive Performances and Ship Flow of a Heeled and Trimmed VLCC,” Annual Autumn Meeting of the Society of Naval Architects of Korea, Sancheong, Korea, October 2004 (In Korean).


Invited Lectures

 

1.    “Open Source for Open innovation,” Semes, Korea, May 2016.

 

2.    “CFD SW 활용의 새로운 파라다임,” 현대중공업 중앙기술원 기반기술연구소, Korea, July 2015.

 

3.    “고효율 축변환 조류발전 터빈 개발 기술 (Technologies for Development of High-Efficiency Tidal Stream Turbines),” Hyundai Engineering and Construction, Seoul, Korea, June 2015.

 

4.    “건물 외부 기류 시뮬레이션,” Seokyoung Systems, Seoul, Korea, March 2015.

 

5.    “조류발전 터빈 성능해석방법 연구 (Tidal Stream Turbine Performance Analysis Methods),” Korea Hydro and Nuclear Power, Daejeon, Korea, March 2015.

 

6.    “Open Innovation in CFD for Naval Architecture,” Seokyoung Systems, Seoul, Korea, January 2015.

 

7.    “New Paradigm in CFD – An Open-Source Approach,” 13th National Annual Conference of Mechanical Engineering, University of Indonesia, Jakarta, Indonesia, October 2014.

 

8.    “Paradigm Change in CFD Led by Open-Source Codes,” CAE Conference 2013, November 2013.

 

9.    “함형설계를 위한 실험 및 전산유체역학 (Experimental and Computational Fluid Dynamics for Hull Form Design of Military Vessels),” 제38회 해양학술세미나 (38th Maritime Academic Seminar), Korea Naval Academy, November 2013.

 

10.    “해양레저산업의 6하원칙 – 현황과 발전방향 (Five W’s and One H for Marine Leisure Industry – Current Status and Development Direction),” 공학한림원 해양산업위원회 3차 워크샵 (3rd Workshop, Ocean Industry Committee, The National Academy of Engineering of Korea), August 2013.

 

11.    “CFD SW의 새로운 패러다임 (New Paradigm of CFD SW),” Mokpo National University, Mokpo, Korea, December 2012.

 

12.    “CFD 패러다임의 변화 : 소스공개 라이브러리를 이용한 맞춤형 코드 개발 (Paradigm Change in CFD: Customized Code Development Using Open Source Libraries),” Korean Register of Shipping, Daejeon, Korea, December 2012.

 

13.    “CFD 패러다임의 변화 : 소스공개 라이브러리를 이용한 맞춤형 코드 개발 (Paradigm Change in CFD: Customized Code Development Using Open Source Libraries),” LG Electronics, Seoul, Korea, September 2012.

 

14.    “Experimental and Computational Research at SNU Towing Tank Lab,” Korea Advanced Institute of Science and Technology, Daejeon, Korea, October 2010.

 

15.    “서울대학교 저항성능실험실 연구 소개 (Research Activities at SNU Towing Tank Lab),” Pusan National University, Busan, Korea, May 2010.

 

16.    “CFD for Turbulence Modification at the Air-Water Interface,” Oceanographic Center, Nova Southeastern University, Dania Beach, FL, February 2010.

 

17.    “CFD Methods for Ship Hull Wake Simulation Including the Rotating Propeller Effect,” Oceanographic Center, Nova Southeastern University, Dania Beach, FL, February 2009.

 

18.    “Numerical Simulation of Free-Surface Flow for Applications in Naval Architecture and Ocean Engineering,” School of Computational Science, Florida State University, Tallahassee, FL, February 2008.

 

19.     “Interaction between Non-Linear Free-Surface Flow and Body Motion,” ANSYS CFD Conference, Busan, Korea, November 2007.

 

20.     “CFD Application to Naval Architecture,” Korea Maritime University, Busan, Korea, October 2007.

 

21.     “A Few Examples of CFD Application to the Non-Linear Free-Surface Flow and Its Interaction with Body Motion,” Technip USA, Houston, TX, October 2007.

 

22.    “How to Design a Boat,” 2007 Science & Technology Mania Competition, Hanyang Univ., Seoul, Korea, May 2007.

 

23.    “Cavtation Modeling in CFD,” Shipbuilding Industry Users Group Meeting of FLUENT, STX Shipbuilding, Jinahe, Korea, March 2007.

 

24.    “Navier-Stokes Equations-Based Computational Fluid Dynamics for Naval Applications,” SNAME New England Section Meeting, Nashua, NH, December 2006.

 

25.    “FLUENT Applications for Naval Hydrodynamics,” Dept. of Naval Architecture and Ocean Engineering, Mokpo National University, Mokpo, Korea, February 2006.

 

26.    “CFD for Marine Applications,” Dept. of Naval Architecture and Ocean Engineering, Seoul National University, Seoul, Korea, June 2005.

 

27.    “Tank Sloshing Simulation Using a Navier-Stokes Solver,” SNAME Panel H-7 Committee Meeting, Houston, TX, September 2004.

 

28.    “Computational Fluid Dynamics and Its Applications at National Maritime Research Institute of Japan,” Ship Controllability Laboratory, Dept. of Naval Architecture and Ocean Engineering, Seoul National University, Seoul, Korea, June 2001.

 

29.    “Unsteady RANS Method for Surface Ship Boundary Layer, Wake, and Wave Fields,” Research Institute of Marine Systems Engineering, Seoul National University, Seoul, Korea, May 2000.

 

30.    “Unsteady Flow around a Wigley Hull Advancing in Regular Head Waves,” Korea Research Institute of Ship and Ocean Engineering, Daejeon, Korea, May 2000.