Internaional conferences

  1. J.Ha, J.Park, G.Park, J.Kim, J.Kim, J.Seo, S.H.Rhee, “Propulsion Performance Analysis of a Partially Submerged Propeller”, Society of Naval Architects and Marine Engineers(SNAME 2023), San Diego, CA, USA, September 27-29, 2023.
  2. I.D.Suh, S.Go, and S.H.Rhee, “Water Entry of a Sphere Moving along a Circular Path at a Constant Speed”, 20th International Conference on Experimental Mechanics(ICEM 2023), Porto, July 2-7, 2023.
  3. J.Park, S.H.Rhee, “Effects of Turbulence Stimulator on Boundary Layer Transition over a Flat Plate”, 20th International Conference on Experimental Mechanics(ICEM 2023), Porto, July 2-7, 2023.
  4. I.D.Suh, and S.H.Rhee, “Improvement of Interface Compression for Flux Evaluation in 2D VOF Advection Problem Using Interpretable Neural Network with Physics-Based Training,” 13th Asian Computational Fluid Dynamics Conference (ACFD 2022), Jeju, October 16- 19, 2022.
  5. I.Lee, and S.H.Rhee, “An Assessment of Cavitation Erosion with a Pressure-based Fully-compressible Flow Solver Using SNUFOAM,” 13th Asian Computational Fluid Dynamics Conference (ACFD 2022), Jeju, October 16- 19, 2022.
  6. J.Seo, G.Kim, J.park, and S.H.Rhee, “Data-driven Modeling of Ship Dynamics by Regression of Free-running Model Test Results,” 34th Symposium on Naval Hydrodynamics (SNH 2022), Washington, Dc, June 26- July 1, 2022.
  7. Y.Heo, W.Seok, and S.H.Rhee, “Flow Analysis for the Development of the Coanda Vortex Ring Thruster (CoVoRT),” 74th Annual Meeting of the APS Division of Fluid Dynamics (APS DFD), Phoenix, AZ, November 21-23, 2021.
  8. Y.Heo, W.Seok, and S.H.Rhee, “Computational Fluid Dynamics Simulation of Energy-Saving Vortex Ring Thruster Using the Coanda Effect,” The 16th International OpenFOAM Workshop (OFW 2021), Dublin, Ireland, June 8-11, 2021.
  9. I.Lee, S.Park, W.Seok, and S.H.Rhee, “Investigation on Cavitation Erosion in Axisymmetric Nozzles,” 11th International Cavitation Symposium (CAV 2021), Daejeon, Korea, May 10-13, 2021.
  10. J.Seo, J.Park, Y.Kim, K.P.Rhee, H.K.Yoon, and S.H.Rhee, “Free-running Model Tests for Assessing Maneuverability of Damaged Surface Combatant,” 33rd Symposium on Naval Hydrodynamics (SNH 2020), Osaka, Japan, October 18-23, 2020.
  11. W.Seok, S.B.Lee, and S.H.Rhee, “Partially-averaged Navier-Stokes Simulation of Turbulent Flow in a Square Duct,” The 15th International OpenFOAM Workshop (OFW 2020), Arlington, VA, USA, June 22-26, 2020.
  12. K Murali, Anada Narayanan, Y.J.Cho, G.P.Park, Nithya Venkatesan, Abdus Samad, and S.H.Rhee, “Numerical study of cavitation of a 100 kW-class marine current turbine”, The 9th East Asian Workshop for Marine Environment and Energy (EAWOMEN2 2019), Osaka, Japan, October 27-29, 2019.
  13. T.Lee, J.Park, D.H.Lee, J.Seo, K.Yun, and S.H.Rhee, “Development of Free-Running Model Test Setup for a Damaged Surface Combatant in Heeled and Trimmed Condition”, 6th International Conference on Advanced Model Measurement Technology for the Maritime Industry (AMT 2019), Rome, Italy, October 9-11, 2019.
  14. Y.J.Cho, W.Seok, J.Park, J.Seo, and S.H.Rhee, “Maneuvering Simulation and Flooded Water Dynamics of a Damaged Surface Combatant by Captive Model Tests using Computational Fluid Dynamics”, ASME Paper AJK2019-5427, ASME-JSME-KSME Joint Fluids Engineering Conference 2019 (AJK2019-FED), San Francisco, CA, July 28-August 1, 2019.
  15. W.Seok, S.B.Lee, and S.H.Rhee, “Comparison of PANS and RANS models for flows around a MARINE propeller”, ASME Paper AJK2019-5427, ASME-JSME-KSME Joint Fluids Engineering Conference 2019 (AJK2019-FED), San Francisco, CA, July 28-August 1, 2019.
  16. J.Seo, H.S.Jeong, K.K.Chang, J.Park, and S.H.Rhee, “Towing Tank Model Tests for Propulsive Performance Analysis of a Waterjet Propelled Amphivious Vehicle”, 6th International Symposium on Marine Propulsors (SMP 2019), Rome, Italy, 26-30 May, 2019.
  17. K.Omkar, K.B. Karthikeyan, Srimathi R, Nithya Venkatesan, E.J. Avital, A.Samad, S.H.Rhee, “A Performance Analysis of Tidal Turbine Conversion System based on Control Strategies”, 2nd International Conference on Energy and Power (ICEP 2018) Sydney, Australia, 13-15 December 2018.
  18. H.S.Jeong, J.Seo, W.Seok, S.H.Rhee, and K.G.Chang, “Towing Tank Model Tests on Waterjet Propulsive Performance,” The 6th World Maritime Technology Conference (WMTC 2018), Shanghai, China, December 4-7, 2018.
  19. D.Kim, S.Park, J.park, H.Yeo, J.Seo, and S.H.Rhee, “Dynamic Stability Analysis including Roll Motion in the Maneuvering Motion for a Damaged Surface Naval Vessel,” 13th International Conference on Stability of Ships and Ocean Vehicles (STAB 2018), Kobe, Japan, September 16-21, 2018.
  20. J.Seo, D.H. Kim, J.S.Ha, S.H.Rhee, H.K.Yoon, J. Park, W.C.Seok, and K.P.Rhee, “Captive Model Tests for Assessing Maneuverability of a Damaged Surface Combatant with Initial Heel Angle,” 32nd Symposium on Naval Hydrodynamics (SNH 2018), Hamburg, Germany, August 5-10, 2018.
  21. S.Park, J.Seo, S.Lee, S.H.Rhee, and S.Lee “6DOF motion and Cavity Dynamics of a Ventilated Super-cavitating Vehicle with Control Fins,” 10th International Cavitation Symposium (CAV 2018), Baltimore, MA, May 14-16, 2018.
  22. J.Seo, A.Amini, S.Lee, J.Park, H.Yeo, M.Farhat, and S.H.Rhee, “An Experimental Study on Suppressing Tip Vortex Cavitation by Means of a Flexible Thread,” 70th Annual Meeting of the APS Division of Fluid Dynamics (APS DFD2017), Denver, CO, November 19-21, 2017.
  23. W.Seok, H.K.Choi, J.Seo, I.D.Suh, and S.H.Rhee, “Large Eddy Simulation of Wave-induced Seperation around a Slender Surface-piercing Body,” The 12th International OpenFOAM Workshop(OFW 2017), Exeter, UK,  July 24-27, 2017.
  24. M.Kumar, G.W.Nam, S.J.Oh, J.Seo, A.Samad, and S.H.Rhee, “Design Optimization of a Horizontal Axis Tidal Stream Turbine Blade using CFD,” International Symposium Marine Propulsors(SMP 2017), Helsinki, Finland, June 12-15, 2017.
  25. W.Seok, H.K.Choi, and S.H.Rhee, “Resistance and Seakeeping Performance Analysis of an Icebreaker Vessel in Oblique Bow Waves Using SNUFOAM,” the 24th International conference on Port and Ocean Engineering under Arctic Conditions (POAC 2017),  Busan, Korea, June 11-16, 2017.
  26. J.Seo, A.Samad, and S.H.Rhee, “Free-Surface Turbulent Wake of a Surface-Piercing Slender Body at Various Froude Numbers,” 69th Annual Meeting of the APS Division of Fluid Dynamics (APS DFD), Portland, OR, November 20-22, 2016.
  27. P.Halder, A.Samad, S.H.Rhee, K.Y.Kim, and H.S.Shim, “Wave Energy Harvesting Turbine: Effect of Solidity,” 7th International Symposium on Fluid Machinery and Fluids Engineering (ISFMFE 2016), Jeju, Korea, October 18-22, 2016.
  28. J.Seo, M.P.Espinoza Haro, C.Santiago Bravo, H.K.Choi, K.P.Rhee, and S.H.Rhee, “Course-Keeping Tests for Safe-Return-to-Port of a Damaged Passenger Ship,” 31st Symposium on Naval Hydrodynamics (SNH 2016), Monterey, CA, September 11-16, 2016.
  29. J.Seo, M.P.Espinoza Haro, and S.H.Rhee, “Experiments and CFD analysis on Safe-Return-to-Port of a Damaged Ship in Head and Following Seas,” ASME Paper FEDSM 2016-7727, ASME 2016 Fluids Engineering Division Summer Meeting (FEDSM 2016), Washington, DC, July 10-14, 2016.
  30. J.Seo, B.Han, S.H.Rhee, S.J.Lee, H.Kim, J.Kim, K.Kwon, and J.Park, “Parametric Study on Hub Vortex Reducing Effects of Propeller Boss Cap Fins by Force and Wake Field Measurements in Open Water and Self-Propulsion Conditions,” ASME Paper OMAE2016-54858, The 35th International Conference on Ocean (OMAE 2016), Offshore and Artic Engineering, Busan, Korea, June 19-24, 2016.
  31. G.H.Kim, H.J.Shin, J.Seo, and S.H.Rhee, “A Numerical Study on Correlation between the Bow Design Parameters and Added Resistance Using the Design of Experiments,” ASME Paper OMAE2016-54861, The 35th International Conference on Ocean, Offshore and Artic Engineering (OMAE 2016), Busan, Korea, June 19-24, 2016.
  32. B.Han, J.Seo, S.J.Lee, and S.H.Rhee, “Parametric Study on Hub Vortex Reducing Effects of Propeller Boss Cap Fins by Force and Wake Field Measurements,” 16th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC 2016), Honolulu, HI, April 10-15, 2016.
  33. J.Seo, and S.H.Rhee, “Reynolds Number Effects on Free Surface Wave Induced Separation around a Surface Piercing Slender Cylinder,” 3rd International Conference on Violent Flows (ICVF 2016), Osaka Prefecture University, Osaka, Japan, March 9-11, 2016.
  34. S.Park, H.B.Lee, H.K.Choi, S.H.Rhee, Y.Choe, H.Kim, C.Kim, J.-H.Kim, B.K.Ahn, and H.T.Kim, “Cavity Dynamics behind 2-D Wedge in Incompressible and Compressigle Flows,” 9th International Symposium on Cavitation (CAV 2015), Ecole Polytechnique Federale de Laussanne, Switzerland, December 6-10, 2015.
  35. J.Seo, S.J.Lee, and S.H.Rhee, “Wake Field Measurement of a Horizontal Axis Tidal Stream Turbine in Various Loading Conditions,” 5th Asis-Pacific Forum on Renewable Energy (AFORE 2015), Jeju, Korea, November 4-7, 2015.
  36. J.Seo, C.Santiago, and S.H.Rhee, “Model Tests for Sate-Return-to-Port of a Damaged Ship in Waves,” World Maritime Technology Conference 2015 (WMTC 2015), Providence, RI, November 3-7, 2015.
  37. J.Seo, B.Han, and S.H.Rhee, “Towed Underwater SPIV Measurements of Flow Fields around a Surface-Piercing Cylinder with Free Surface Effects,” ASME Paper AJK2015-20165, ASME-JSME-KSME Joint Fluids Engineering Conference 2015 (AJK2015-FED), Seoul, Korea, July 26-31, 2015.
  38. H.B.Lee, and S.H.Rhee, “A Study of Computational Schemes for Six Degree-of-Freedom Motion of a Ship in Waves Using OpenFOAM,” The 10th International OpenFOAM Workshop (OFW 2015), University of Michigan, Ann Arbor, MI, June 29-July 2, 2015.
  39. H.B.Lee, and S.H.Rhee, “A New Dynamic Interface Compression Method for Free-Surface Flows Around High-Speed Planing Craft,” 6th International Conference on Computational Methods in Marine Engineering (MARINE 2015), Rome, Italy, June 15-17, 2015.
  40. J.Seo, T.G. Lim, S.T.Park, and S.H.Rhee, “Free Running Model Tests of a Damaged Ship in Head and Following Seas,” The 12th International Conference on the Stability of Ships and Ocean Vehicles (STAB 2015), University of Strathclyde,  Glasgow, UK, June 14-19, 2015.
  41. H.Sadat-Hosseini, D.H.Kim, P.Carrica, S.H.Rhee, and F.Stern, “URANS Simulations for a Flooded Ship in Calm Water and Regular Beam Waves,” The 12th International Conference on the Stability of Ships and Ocean Vehicles (STAB 2015), University of Strathclyde, Glasgow, UK, June 14-19, 2015.
  42. J.Seo, S.T.Park, and S.H.Rhee, “Experimental Study on Wake Fields of a Horizontal Axis Tidal Stream Turbine Model in Various Loading Conditions,” 4th International Symposium on Marine Propulsors (SMP 2017), University of Texas at Austin, TX, May 31 – June 4, 2015.
  43. H.B.Lee, and S.H.Rhee, “Improvement of Interface Compression Method for High Speed Surface Craft,” 2014 Korea-Japan CFD Workshop, Jinju, Korea, November 13-14, 2014.
  44. T.G. Lim, J.Seo, S.T.Park, and S.H.Rhee, “Experimental Study on the Safe-Return-to-Port of a Damaged Ship in Head Seas,” 30th Symposium on Naval Hydrodynamics (SNH 2014), Tasmania, Australia, November 2-7, 2014.
  45. H.B.Lee, and S.H.Rhee, “A Numerical Simulation of Running Attitude and Resistance of High Speed Surface Craft,” 10th Asian Computational Fluid Dynamics Conference (ACFD 2014), Jeju, Korea, October 19-23, 2014.
  46. S.H.Park, G.Oh, and S.H.Rhee, “Full Scale Performance Prediction of an Energy Saving Device by Using Computational Fluid Dynamics,” 10th Asian Computational Fluid Dynamics Conference (ACFD 2014), Jeju, Korea, October 19-23, 2014.
  47. S.Park, G.Oh, S.H.Rhee, B.Y.Koo, and H.B.Lee, “Numerical Analysis of Turbulent Flow around Energy Saving Pre-swirl Stator for Full and Model Scale Ships,” 5th European Conference on Computational Mechanics (ECCM V), Barcelona, Spain, July 20-25, 2014.
  48. H.B.Lee, S.H.Rhee, and S.H.Park, “Dynamic Interface Compression Method for High Speed Surface Craft,” The 9th International OpenFOAM Workshop (OFW 2014), Zagreb, Croatia, June 23-26, 2014.
  49. J.Seo, D.M.Seol, T.Lim, S.T.Park, B.W.Han, and S.H.Rhee, “A Stereo PIV Measurement of a Model Ship Wake in a Towing Tank with Uncertainty Assessment,” The 10th International Symposium on Particle Image Velocimetry (PIV 2013), Delft, Netherlands, July 2-4, 2013.
  50. H.B.Lee and S.H.Rhee, “Numerical Simulation of Wave Induced Motion of a Floating Body,” The 8th International OpenFOAM Workshop (OFW 2013), Jeju, Korea, June 11-14, 2013.
  51. S.W.Park, S.Park, and S.H.Rhee, “Performance Predictions of a Horizontal Axis Tidal Stream Turbine Considering the Effects of Blade Deformation,” The 3rd International Symposium on Marine Propulsors (SMP 2013), Tasmania, Australia, May 5-8, 2013.
  52. S.W.Park, S.Park, and S.H.Rhee, “Numerical Simulation of a Horizontal Axis Tidal Stream Turbine Considering the Effect of Blade,” 1st Asian Wave and Tidal Energy Conference (AWTEC), Jeju, Korea, November 27-30, 2012.
  53. S.Park, and S.H.Rhee, “Development of practical formula for prediction of cavitation erosion,” 5th International Symposium on Fluid Machinery and Fluids Engineering (ISFMFE 2012), Jeju, Korea, October 24-27, 2012.
  54. H.Sadat-Hosseini, D.H.Kim, S.K.Lee, S.H.Rhee, P.Carrica, F.Stern, and K.-P.Rhee, “CFD and EFD Study of Damaged Ship Stability in Regular Waves,” 11th International Conference on the Stability of Ships and Ocean Vehicles (STAB 2012), Athens, Greece, September 23-28, 2012.
  55. S.W.Park, S.Park, and S.H.Rhee, “Performance Analysis of Horizontal Axis Tidal Stream Turbine in Un-conventional Ambient Flows,” The 2012 International Conference on Advances in Wind and Structures (ACEM 12), Seoul, Korea, August 26-29, 2012.
  56. S.Lee, J.M.You, H.H.Lee, S.H.Rhee, and K.P.Rhee, “Experimental Study on the Six Degree-of-Freedom Motion of a Damaged Ship for CFD Validation,” 29th Symposium on Naval Hydrodynamics (SNH 2012), Gothenburg, Sweden, August 26-31, 2012.
  57. S.Park, and S.H.Rhee, “CFD Validation for Super-Cavitating Flow around Two-Dimensional Cavitators,” 29th Symposium on Naval Hydrodynamics (SNH 2012), Gothenburg, Sweden, August 26-31, 2012.
  58. S.Park, S.H.Rhee, and B.R.Shin, “Pressure-Based Solver for Incompressible and Isothermal Compressible Flows with Cavitation,” 8th International Symposium on Cavitation (CAV 2012), Singapore, August 13-16, 2012.
  59. S.Park, and S.H.Rhee, “Incompressible and Compressible Flows with Cavitation,” 7th International OpenFOAM Workshop (OFW 2012), Darmstadt, Germany, June 25-28, 2012.
  60. H.B.Lee, and S.H.Rhee, “Libraries for 6-DOF Motion of a Floating Body,” 7th International OpenFOAM Workshop (OFW 2012), Darmstadt, Germany, June 25-28, 2012.
  61. B.S.Hyun, J.K.Lee, D.H.Lee, S.H.Rhee, S.W.Park, M.C.Kim, I.R.Do, D.S.Cho, and M.Song, “On Development of Practical Design Tools for Tidal Stream Turbines,” Ocean 2012 MTS/IEEE Yeosu, Yeosu, Korea, May 21-24, 2012.
  62. S.W.Park, S.Park, and S.H.Rhee, “Fluid-Structure Interaction Analysis for Open Water Performance Prediction of Horizontal Axis Tidal Stream Turbine,” 8th KSME-JSME Thermal and Fluids Engineering Conference, Incheon, Korea, March 18-21, 2012.
  63. S.Park, and S.H.Rhee, “Computational Analysis of Unsteady Cavitation on a Three-Dimensional Twisted Hydrofoil,” AIAA Paper 2012-1100, 50th AIAA Aerospace Sciences Meeting, Nashville, TN, January 9-12, 2012.
  64. S.W.Park, and S.H.Rhee, “Numerical Analysis for fluid-structure interaction prediction of horizontal axis tidal stream energy conversion turbine,” 1st Asia-Pacific Forum on Renewable Energy (AFORE 2011), Seoul, Korea, November 16-19, 2011.
  65. G.S.Song, C.B.Hong, D.Y.Lee, Q.Miao, S.Park, and S.H.Rhee, “Numerical Simulation of a Stationary Cylinder in a Cross Flow from the Benchmark Study of ITTC Ocean Engineering Committee,” 25th Technical Exchange and Advisory Meeting on Marine Structures (TEAM 2011), Incheon, Korea, September 26-29, 2011.
  66. A.Fujimura, S.Matt, A.Soloviev, C.Maingot, and S.H.Rhee, “The Impact of Thermal Stratification and Wind Stress on Sea Surface Features in SAR Imagery,” International Geoscience and Remote Sensing Symposium (IEEE 2011), Vancouver, Canada, July 25-29, 2011.
  67. J.Seo, D.M.Seol, and S.H.Rhee, “Towed Underwater PIV Measurement for Free-Surface Wave Effects on Turbulent Wake of a Surface-Piercing Body,” ASME Paper AJK2011-11022, Symposium on Non-Invasive Measurements in Single and Multiphase Flows, ASME-JSME-KSME Joint Fluids Engineering Conference 2011, Hamamatsu, Japan, July 24-29, 2011.
  68. S.Park, and S.H.Rhee, “Numerical Analysis of Super-Cavitating Flow Around a Two-Dimensional Cavitator Geometry,” ASME Paper AJK2011-33010, 46th Cavitation and Multiphase Flow Forum, ASME-JSME-KSME Joint Fluids Engineering Conference 2011, Hamamatsu, Japan, July 24-29, 2011.
  69. J.Seo, D.M.Seol, and S.H.Rhee, “Underwater PIV Measurement and Uncertainty Assessment for Free-Surface Wave Effects on the Turbulent Wake of a Surface-Piercing Parabolic Body in Towing Tank,” AIAA Paper 2011-3727, 41st AIAA Fluid Dynamics Conference and Exhibit, Honolulu, Hawaii, June 27-30, 2011.
  70. S.Park, and S.H.Rhee, “Numerical Analysis of Two-Dimensional Turbulent Super-Cavitating Flow around a Cavitator Geometry,” AIAA Paper 2011-3209, 20th AIAA Computational Fluid Dynamics Conference, Honolulu, Hawaii, June 27-30, 2011.
  71. S.Lee, J.M.You, H.H.Lee, S.H.Rhee, and K.P.Rhee, “Free Roll Decay Study of a Damaged Ship for CFD Validation,” ASME Paper OMAE2011-49315, 30th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2011), Rotterdam, The Netherlands, June 17-22, 2011.
  72. J.H.Lee, D.H.Kim, S.H.Rhee, I.R.Do, B.C.Shin, and M.C.Kim, “Computational and Experimental Analysis of Horizontal Axis Marine Current Turbine Design,” 2nd International Symposium on Marine Propulsors (SMP 2011), Hamburg, Germany, June 15-17, 2011.
  73. J.H.Lee, D.H.Kim, and S.H.Rhee, “Horizontal Axis Tidal Stream Turbine Analysis Using Numerical Simulation,” AIAA Paper 2011-0130, 49th AIAA Aerospace Sciences Meeting, Orlando, FL, January 4-7, 2011.
  74. S.Park, and S.H.Rhee, “Heat and Fluid Flow Analysis of Ship’s Exhaust Gas,” 3rd Asian Conference on Mixing (ACOM 2010), Jeju, Korea, October 19-22, 2010.
  75. J.H.Lee, D.M.Seol, S.H.Rhee, H.R.Chi, D.S.Jun, and M.C.Ryu, “Automatic Tool Development for Ship Hull Form Parametric Study,” 11th International Symposium on Practical Design of Ships and Other Floating Structures (PRADS 2010), Rio de Janeiro, Brazil, September 19-24, 2010.
  76. J.Seo, J.H.Lee, B.J.Park, and S.H.Rhee, “Flexible Meshing Strategy for Prediction of Ship Resistance and Propulsion Performance,” 11th International Symposium on Practical Design of Ships and Other Floating Structures (PRADS 2010), Rio de Janeiro, Brazil, September 19-24, 2010.
  77. H.H.Lee, H.J.Lim, and S.H.Rhee, “Experimental Study of the Green Water on Floating Structures for CFD Validation,” 28th Symposium on Naval Hydrodynamics (SNH 2010), Pasadena, CA, September 12-17, 2010.
  78. J.H.Lee, D.M.Seol, S.H.Rhee, H.R.Chi, D.S.Jun, and M.C.Ryu, “Hybrid Meshing Approach For a POD Propulsion Cruise Ship Resistance Performance Prediction,” AIAA Paper 2010-4730, 40th AIAA Fluid Dynamics Conference, Chicago, IL, June 27-July 1, 2010.
  79. J.D.Kim, S.Y.Hong, S.H.Rhee, H.B.Lee, and J.H.Song, “Numerical Predictions of Hydrofoil Sheet Cavitation Noise Using CFD Analysis,” 39th International Congress and Exposition on Noise Control Engineering (Inter-Noise 2010), Lisbon, Portugal, June 13-16, 2010.
  80. S.Matt, A.Fujimura, A.Soloviev, and S.H.Rhee, “Modification of Turbulence at the Air-Sea Interface Due to the Presence of Surfactants and Implications for Gas Exchange. Part II: Numerical Simulations,” 6th International Symposium on Gas Transfer at Water Surfaces (GTWS-6), Kyoto, Japan, May 17-21, 2010.
  81. J.H.Lee, B.J.Park, D.M.Seol, S.H.Rhee, D.S.Jun, H.R.Chi, and M.C.Ryu, “Hybrid Meshing Approach for Resistance Performance Prediction of a POD Propulsion Cruise Ship,” ASCHT09-B45, 2nd Asian Symposium on Computational Heat Transfer and Fluid Flow (ASCHT 2009), Jeju, Korea, October 20-23, 2009.
  82. J.K.Oh, H.B.Lee, K.H.Shin, C.M.Lee, S.H.Rhee, J.C.Suh, and H.Kim, “Rudder Gap Flow Control for Cavitation Suppression,” CAV2009 Paper No. 70, 7th International Symposium on Cavitation (CAV 2009), Ann Arbor, MI, August 16-20, 2009.
  83. H.H.Lee, and S.H.Rhee, “Numerical Parameters Influencing Two Dimensional Water Entry Simulations,” ISOPE-2009-TPC-246, 19th International Offshore and Polar Engineering Conference, Osaka, Japan, June 21-26, 2009.
  84. H.B.Lee, B.J.Park, S.H.Rhee, J.H.Bae, K.W.Lee, S.J.An, and W.J.Jeong, “Cryogenic Fluid Flow in the Insulation Wall of the Cargo Containment System,” ASME Paper OMAE2009-79354, 28th International Conference on Ocean, Offshore and Arctic Engineering, Honolulu, HI, May 31-June 5, 2009.
  85. S.H.Rhee, J.K.Oh, C.M.Lee, and H.B.Lee, “Experimental and Computational Analysis of Rudder Gap Cavitation,” AIAA Paper 2009-1504, 47th AIAA Aerospace Sciences Meeting, Orlando, FL, January 5-8, 2009.
  86. K.J.Maki, L.J.Doctors, R.M.Scher, W.M.Wilson, S.H.Rhee, A.W.Troesch, and R.F.Beck, “Conceptual Design and Analysis of a High-Speed Sealift Trimaran,” 2008 SNAME Maritime Technology Conference & Expo, Houston, TX, October 15-17, 2008.
  87. J.K.Oh, C.M.Lee, H.B.Lee, D.Seo, S.H.Rhee, J.C.Suh, S.H.Lee, and H.Kim, “Rudder Gap Cavitation Suppression Using Gap Flow Blocking Devices,” 3rd  Pan Asian Association of Maritime Engineering Society and Advanced Maritime Engineering Conference 2008 (3rd PAAMES), Chiba, Japan, October 20-22, 2008.
  88. S.H.Rhee, J.K.Oh, C.M.Lee, H.B.Lee, D.Seo, J.C.Suh, S.H.Lee, and H.Kim, “Concept Verification of Rudder Gap Cavitation Suppression Device through Experiments and Computations,” 27th Symposium on Naval Hydrodynamics (SNH 2008), Seoul, Korea, October 5-10, 2008.
  89. J.K.Oh, C.M.Lee, H.B.Lee, D.Seo, S.H.Rhee, J.C.Suh, S.H.Lee, and H.Kim, “Rudder Gap Cavitation and its Suppression Devices,” ASME Fluids Engineering Division Summer Conference, Jacksonville, FL, August 10-14, 2008.
  90. S.H.Rhee, J.K.Oh, S.H.Lee, and H.Kim, “Development of Rudder Cavitation Suppression Devices and its Concept Verification through Experimental and Numerical Studies,” 10th International Symposium on Practical Design of Ships and Other Floating Structures (PRADS 2007), Houston, TX, September 30-October 5, 2007.
  91. P.J.Zwart, P.G.Godin, J.Penrose, and S.H.Rhee, “Ship Hull Simulations with ANSYS CFX,” 10th International Symposium on Practical Design of Ships and Other Floating Structures (PRADS 2007), Houston, TX, September 30-October 5, 2007.
  92. K.J.Maki, L.J.Doctors, S.H.Rhee, W.M.Wilson, R.F.Beck, and A.W.Troesch, “Resistance Prediction of a High-Speed Sealift Trimaran,” 9th International Conference on Numerical Ship Hydrodynamics (NSH 2007), Ann Arbor, MI, August 5-8, 2007.
  93. B.Sasanapuri, V.S.Shirodkar, W.Wilson, S.Kadam, and S.H.Rhee, “Virtual Model Basin for Resistance, Maneuvering, and Seakeeping – A RANS Based Approach,” ASME Paper OMAE2007-29301, 26th International Conference on Offshore Mechanics and Arctic Engineering, San Diego, CA, June 10-15, 2007.
  94. Y.Kim, S.H.Rhee, and S.M.Jee, “Wing-In-Ground Effects on Free Surface,” 2nd Pan Asian Association of Maritime Engineering Societies Meeting and Advanced Maritime Engineering Conference 2006 (2nd PAAMES), Cheju, Korea, October 15-18, 2006.
  95. S.H.Rhee, and H.Kim, “Analysis of Rudder Cavitation in Propeller Slipstream and Development of its Suppression Devices,” Maritime Technology Conference & Expo (SNAME 2006), Ft.Lauderdale, FL, October 19-21, 2006.
  96. S.A.Kinnas, H.Lee, B.Mishra, L.He, S.H.Rhee, and B.Sasanapuri, “Hydrodynamic Analysis of Podded Propellers,” Propellers/Shafting 2006 Symposium (SNAME 2006), Virginia Beach, VA, September 2006.
  97. S.E.Kim, and S.H.Rhee, “Large Eddy Simulation of Turbulent Free-Surface Flows Around Surface-Piercing Bodies,” 26th Symposium on Naval Hydrodynamics (SNH 2006), Rome, Italy, September 17-22, 2006.
  98. K.J.Maki, A.Iafrati, S.H.Rhee, R.F.Beck, and A.W.Troesch, “The Transom-Stern Modeled as a Backward Facing Step,” 26th Symposium on Naval Hydrodynamics (SNH 2006), Rome, Italy, September 17-22, 2006.
  99. S.H.Rhee, and B.Makarov, “Validation Study for Free-Surface Wave Flows Around Surface-Piercing Cylindrical Structures,” ASME Paper OMAE2005-67036, 24th International Conference on Offshore Mechanics and Arctic Engineering, Halkidiki, Greece, June 12-17, 2005.
  100. S.H.Rhee, and H.Kim, “Development of a High-Performance Cavitation-Free Rudder System,” ISOPE-2009-TPC-246, 19th International Offshore and Polar Engineering Conference, Seoul, Korea, June 21-26, 2005.
  101. S.H.Rhee, “Unsteady RANS Method for Liquid Tank Sloshing,” Applied Vehicle Technology Panel (AVT) Symposium (AVT-123) on Flow Induced Unsteady Loads and the Impact on Military Applications, Budapest, Hungary, April 2005.
  102. S.H.Rhee, and C.Skinner, “Unstructured Grid Based Navier-Stokes Solver for Free-Surface Flow around Surface Ships,” CFD Workshop Tokyo 2005, Tokyo, Japan, March 9-11, 2005.
  103. S.E.Kim, and S.H.Rhee, “Prediction of Tip-Vortex Flow Past a Finite Wing,” AIAA Paper 2005-0058, 43rd AIAA Aerospace Sciences Meeting and Exhibit, Reno, Nevada, USA, January 10-13, 2005.
  104. J.Yang, S.H.Rhee, J.Lee, and H.Kim, “Evaluation of the Propulsive Performance of a Tanker in Damaged Conditions,” 6th International Conference on Hydrodynamics (ICHD 2004), Perth, Australia, November 24-26, 2004.
  105. S.H.Rhee, B.Makarov, H.Krishnan, and V.Ivanov, “Assessment of Numerical Techniques in Volume of Fluid Method for Free-Surface Wave Flows,” 9th International Symposium on Practical Design of Ships and Other Floating Structures (PRADS 2004), Hamburg, Germany, September 12-17, 2004.
  106. S.E.Kim, and S.H.Rhee, “Toward High-Fidelity Computation of Tip-Vortex Around Lifting Surfaces – What Does It Take?,” 25th Symposium on Naval Hydrodynamics (SNH 2004), St.John’s, Canada, August 8-14, 2004.
  107. S.H.Rhee, “A Validation Study for Tank Sloshing Using a Navier-Stokes Solver,” ASME Paper OMAE2004-51083, 23rd International Conference on Offshore Mechanics and Arctic Engineering, Vancouver, Canada, June 20-24, 2004.
  108. T.Watanabe, T.Kawamura, M.Maeda, and S.H.Rhee, “Simulations of Steady and Unsteady Cavitation on a Marine Propeller Using a RANS CFD code,” 5th International Symposium on Cavitation (CAV 2003), Osaka, Japan, November 1-5, 2003.
  109. S.H.Rhee, T.Kawamura, and H.Li, “A Study of Propeller Cavitation Using a RANS CFD Method,” 8th International Conference on Numerical Ship Hydrodynamics, Busan, Korea, September 19-21, 2003.
  110. S.H.Rhee, and S.Joshi, “CFD Validation for a Marine Propeller Using an Unstructured Mesh Based RANS Method,” ASME Paper FEDSM2003-45397, 7th International Symposium on Advances in Numerical Modeling of Aerodynamics and Hydrodynamics in Turbomachinery, 4th ASME-JSME Joint Fluids Engineering Conference, Honolulu, HI, USA, July 2003.
  111. S.H.Rhee, and S.Joshi, “FLUENT Applications to Flow Around Marine Propellers,” 2nd MIT Conference on Computational Fluid and Solid Mechanics, Cambridge, MA, USA, June 17-20, 2003.
  112. S.H.Rhee, and E.Koutsavdis, “Unsteady Marine Propulsor Blade Flow – A CFD Validation with Unstructured Dynamic Meshing,” AIAA Paper 2003-3887, 33rd AIAA Fluid Dynamics Conference, Orlando, FL, USA, June 23-26, 2003.
  113. H.Li, S.A.Vasquez, and S.H.Rhee, “Development and Application of a Robust Cavitation Model for Engineering Cavitating Flows,” Workshop on Cavitation and Related Research Issues, Johns Hopkins Univ., Baltimore, MD, USA, January 2003.
  114. S.E.Kim, S.H.Rhee, and D.Cokljat, “Application of Modern Turbulence Models to Vortical Flow Around a 6:1 Prolate Spheroid at Incidence,” AIAA Paper 2003-0429, 41st AIAA Aerospace Sciences Meeting and Exhibit, Reno, Nevada, USA, January 6-9, 2003.
  115. S.E.Kim, S.H.Rhee, and D.Cokljat, “High-Incidence and Dynamic Pitch-Up Maneuvering Characteristics of a Prolate Spheroid – CFD Validation,” 24th Symposium on Naval Hydrodynamics (SNH 2002), Fukuoka, Japan, July 8-13, 2002.
  116. S.H.Rhee, S.E.Kim, H.Ahn, J.Oh, and H.Kim, “Analysis of a Jet-Controlled High-Lift Hydrofoil with a Flap,” 24th Symposium on Naval Hydrodynamics (SNH 2002), Fukuoka, Japan, July 8-13, 2002.
  117. S.E.Kim, and S.H.Rhee, “Assessment of Eight Turbulence Models for a Three-Dimensional Boundary Layer Involving Crossflow and Streamwise Vortices,” AIAA Paper 2002-0852, 40th AIAA Aerospace Sciences Meeting and Exhibit, Reno, Nevada, USA, January 14-17, 2002.
  118. S.H.Rhee, and T.Hino, “CFD Simulation of Free-Surface Flows around Modern Cargo Ships,” RIAM Symposium on Hydrodynamic Analyses of Moving Boundaries and Ambient Fluid, Report of RIAM Symposium, No.12 ME-S2, Research Institute of Applied Mechanics, Kyushu Univ., Kyushu, Japan, March 2001.
  119. S.H.Rhee, and T.Hino, “Numerical Simulation of 3D Turbulent Flow Separation Around a Spheroid,” 14th Computational Fluid Dynamics Symposium, Tokyo, Japan, December 9-10, 2000.
  120. S.H.Rhee, and T.Hino, “Computational Investigation of 3D Turbulent Flow Separation around a Spheroid using an Unstructured Grid Method,” Fall Meeting of Society of naval Architects of Japan, Osaka, Japan, November 2000.
  121. S.H.Rhee, T.Hino, N.Hirata, Y.Kodama, K.Kume, H.Takeshi, and Y.Ukon, “Concurrent and Complementary Experimental and Computational Investigations for Hydrodynamic Design System of a Surface Ship,” International Mechanical Engineering Congress and Exposition, Forum on Integrated Experimental and Simulation Investigations in Research and Design, Orlando, Florida, USA, November 2000.
  122. S.H.Rhee, and T.Hino, “Unstructured Grid Flow Solver for Practical Ship Hulls,” Gothenburg 2000 Workshop on CFD in Ship Hydrodynamics, Gothenburg, Sweden, September 2000.
  123. S.H.Rhee, and T.Hino, “Unstructured Grid Flow Solver for Ship Flows,” 4th International Conference on Hydrodynamics (ICHD 2000), Yokohama, Japan, September 7-9, 2000.
  124. S.H.Rhee, and T.Hino, “Free-surface Flow Analysis around a Ship Hull using an Unstructured Grid Flow Solver,” 11th Computational Fluid Mechanics Symposium, Kyoto, Japan, July 10-14, 2000.
  125. S.H.Rhee, and T.Hino, “Uncertainty Assessment of RANS CFD Simulations using an Unstructured Grid Method,” 13th Computational Fluid Dynamics Symposium, Tokyo, Japan, December 21-23, 1999.
  126. S.H.Rhee, and F.Stern, “Numerical Modeling of the Trailing Wake of a Breaking Wave,” ONR Workshop on Free-Surface Turbulence and Bubbly Flows, La Jolla, CA, February 1999.
  127. J.Longo, S.H.Rhee, D.Kuhl, B.Metcalf, R.Rose, and F.Stern, “IIHR Towing-Tank Wavemaker,” 25th American Towing Tank Conference (ATTC), Iowa City, Iowa, September 24-25, 1998.
  128. S.H.Rhee, and F.Stern, “Unsteady RANS Method for Surface Ship Boundary Layer and Wake and Wave Field,” 3rd Osaka Colloquium on Advanced CFD Applications to Ship Flow and Hull Form Design, Osaka, Japan, May 20-27, 1998.
  129. S.H.Rhee, “Boundary Layer and Wake of a Surface-Piercing Body with Ambient Waves,” KSEA 6th Midwest Regional Conference, Korean-American Scientists and Engineers Association, Midwest Chapter, Iowa City, IA, June 1996.
  130. S.H.Rhee, S.S.Rhyu, and H.Kim, “A Study on Stern Form Modification of Full Ship,” Hull Form 92 Workshop, Inha University, Incheon, Korea, June 1992.
  131. J.H.Yoo, S.S.Rhyu, S.H.Rhee, and H.Kim, “Some Extension of Series 60 Data for Full Ship,” 1st Korea-Japan Workshop on Hydrodynamics in Ship Design, Seoul, Korea, June 1991.